Traxxas Transmitter Antenna

TRAXXAS
RADIO ADD-ON Traxxas replacement and optional parts are
offered for your radio system. listed below for stock numbers, descriptions,
and costs. See the ""Intro to Radios'' info fo an
description of the uses for these items.

This thing is frequently acquired with the above discussed thing.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

INCLUDES:
Traxxas Titan 550 Motor, two capacitors and two leads with adapters

REQUIRES:
Installing in vehicle

SPECS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specifications such as RPM are not supplied

Here is a fantastic thing that many others have actually bought at the very same time.



This is the Traxxas Male Port to Molex Female Port Adapter.

FEATURES:
Shrouded wire connections (no diminish tube needed)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it impossible to link backwards
Textured surface for simple gripping
Suitable with high-current 12-gauge wire
Secure, favorable locking spring packed terminals for consistent
    contact
Numerous locking barbs keep terminals secure

INCLUDES:
One Traxxas male connector to Molex female port adapter

REMARKS:
Molex connector not suitable for high present use

This thing compliments the main item right here.



This is the Traxxas Female Port to Molex Male Port Adapter.

FEATURES:
Shrouded wire connections (no diminish tube needed)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it impossible to link backwards
Textured surface for simple gripping
Suitable with high-current 12-gauge wire
Secure, favorable locking spring packed terminals for consistent
    contact
Numerous locking barbs keep terminals secure

INCLUDES:
One Traxxas female connector to Molex male port adapter

REMARKS:
Molex connector not suitable for high present use

This is a fantastic addition to the thing presently being reviewed.

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at rear of chassis to avoid vehicle from turning over
    during wheelies

INCLUDES:
Put together optional Wheelie Bar with installing instructions and
    hardware

REQUIRES:
Fastening to rear of chassis

Here is a fantastic thing that many others have actually bought at the very same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon construction

INCLUDES:
Two Front bearing (center) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Many others have actually acquired this thing along with the thing that you are presently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for use in much heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB shows capability by means of Castle Link USB adapter (not included,
    order CSEM6300)
Water resistant for use in almost every environment (not planned for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces numerous stock brushed motors
Four magnet, four pole rotor for higher torque
1.4" size slotted stator
Easily removable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Change, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery connector of modeler's choice

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)