Traxxas Transmitter Antenna

TRAXXAS
RADIO ADD-ON Traxxas replacement and optional parts are
available for your radio system. below for stock numbers, descriptions,
and prices. See the ""Intro to Radios'' details fo an
description of the uses for these products.

This thing is often purchased with the above discussed thing.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

INCLUDES:
Traxxas Titan 550 Motor, two capacitors and two leads with ports

REQUIRES:
Installing in car

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specifications such as RPM are not provided

Here is a excellent thing that lots of others have bought at the exact same time.



This is the Traxxas Male Connector to Molex Female Connector Adapter.

FEATURES:
Shrouded wire connections (no diminish tube needed)
Wide area, gold-plated terminals
Reverse polarity protection makes it difficult to connect in reverse
Textured surface for simple gripping
Suitable with high-current 12-gauge wire
Secure, favorable locking spring packed terminals for constant
    contact
Multiple locking barbs keep terminals secure

INCLUDES:
One Traxxas male adapter to Molex female port adapter

REMARKS:
Molex adapter not suitable for high current use

This thing praises the main item right here.



This is the Traxxas Female Connector to Molex Male Connector Adapter.

FEATURES:
Shrouded wire connections (no diminish tube needed)
Wide area, gold-plated terminals
Reverse polarity protection makes it difficult to connect in reverse
Textured surface for simple gripping
Suitable with high-current 12-gauge wire
Secure, favorable locking spring packed terminals for constant
    contact
Multiple locking barbs keep terminals secure

INCLUDES:
One Traxxas female adapter to Molex male port adapter

REMARKS:
Molex adapter not suitable for high current use

This is a amazing enhancement to the thing currently being discussed.

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at rear of chassis to prevent car from flipping over
    during wheelies

INCLUDES:
Assembled optional Wheelie Bar with installing instructions and
    hardware

REQUIRES:
Securing to rear of chassis

Here is a excellent thing that lots of others have bought at the exact same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
Two Front bearing (hub) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if required use (2) DTXC1547.

Many others have purchased this thing together with the thing that you are currently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for use in heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB programming ability through Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for use in almost every environment (not planned for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes numerous stock brushed motors
4 magnet, 4 pole rotor for greater torque
1.4" size slotted stator
Easily removable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Change, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery adapter of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: 2S LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)