Traxxas Transmitter Antenna

TRAXXAS
RADIO ACCESSORIES Traxxas replacement and optional parts are
available for your radio system. below for stock numbers, descriptions,
and prices. See the ""Introduction to Radios'' info fo an
description of the uses for these items.

This item is often gotten with the above pointed out item.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

INCLUDES:
Traxxas Titan 550 Motor, two capacitors and two leads with ports

REQUIRES:
Setting up in car

SPECS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specs such as RPM are not offered

Here is a wonderful item that numerous others have actually bought at the same time.



This is the Traxxas Male Port to Molex Female Port Adapter.

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide area, gold-plated terminals
Reverse polarity defense makes it impossible to link in reverse
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Protect, positive locking spring loaded terminals for constant
    contact
Numerous locking barbs keep terminals secure

INCLUDES:
One Traxxas male port to Molex female port adapter

COMMENTS:
Molex port not ideal for high present use

This item compliments the main item right here.



This is the Traxxas Female Port to Molex Male Port Adapter.

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide area, gold-plated terminals
Reverse polarity defense makes it impossible to link in reverse
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Protect, positive locking spring loaded terminals for constant
    contact
Numerous locking barbs keep terminals secure

INCLUDES:
One Traxxas female port to Molex male port adapter

COMMENTS:
Molex port not ideal for high present use

This is a superb addition to the item presently being discussed.

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at back of chassis to avoid car from flipping over
    during wheelies

INCLUDES:
Put together optional Wheelie Bar with installing directions and
    hardware

REQUIRES:
Attaching to back of chassis

Here is a wonderful item that numerous others have actually bought at the same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2 Front bearing (center) carriers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Several others have actually gotten this item along with the item that you are presently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for use in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB programs capability through Castle Link USB adapter (not consisted of,
    order CSEM6300)
Waterproof for use in nearly every environment (not intended for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces many stock brushed motors
4 magnet, 4 pole rotor for higher torque
1.4" diameter slotted stator
Easily removable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Change, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery port of modeler's choice

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)