Traxxas Toe Link 5.0Mm Steel Frnt Or Rr (2) Revo

This is a pair of replacement Toe Links for the Traxxas Revo Truck.
    These change the position of the toe on the vehicle.

FEATURES:
Steel turnbuckle design
5.0mm size

CONSISTS OF:
Two front or rear toe links

NEEDS:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 5.1" (129mm)

This thing praises the above discussed thing.

Rod Ends Revo Large W/ Hollow Balls

This is the Big Rod End Set for the Traxxas Revo.

FEATURES:
Plastic building
Black in color
Metal Pivot Balls

CONSISTS OF:
12 Rod Ends
12 Pivot Balls

NEEDS:
Assembly to car

SPECS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Get this thing to enhance the one you read about.

Push Rod Assmbld W/Rod Ends (2) For Use W/# 5357 Revo

This is the set of Steel Pushrods for the Traxxas Revo.

FEATURES:
Metal pushrod building
Plastic rod ends with hollow ball ends

CONSISTS OF:
(2) pushrods
(4) rod ends
(4) hollow ball ends

NEEDS:
Setup on a Traxxas Revo

SPECS:
Pushrod length end-to-end: 4-1/16" (102mm)
Pushrod length in between threads: 3-1/4" ( 81mm)
Diameter of unthreaded section: 3/16" ( 5mm)

REMARKS:
These pushrods work with the long travel #5356, TRAC5356, or
progressive rocker 1 #5357, TRAC5357, arm sets.

Want an additional fantastic thing to enhance the above discussed thing?

Push Rod Assmbld W/Rod Ends (2) For Use W/#5359 Revo

These are the (optional) Steel Pushrods for the Rocker Arms
for the REVO from Traxxas
These go in between the Rocker Arms and the Lower Suspension Arms

FEATURES:
Black steel building

CONSISTS OF:
Two Pushrods w/pre-installed rod ends and balls

NEEDS:
Installing on the car

SPECS:
Length: 5.4" (137mm) end to end consisting of rod ends
Diameter: 0.20" (5mm)

REMARKS:
For rod ends only utilize TRAC5347

This thing praises the main item right here.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

CONSISTS OF:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Guideline sheet

NEEDS:
Two plans needed to finish truck

Get this thing to enhance the one you read about.



Functions
Suitable for high-stress 1/4 scale/giant scale models
strong and resilient

Specs
Linkages: Control Horns
Product : Metal
Thread Size: 8-32

The listed below thing also sets actually well with the thing being discussed.

Titanium Pro-Links 4-40x4-1/2" (2)

Specs
Hardware: Turnbuckles/Pro-Links
Hardware Length : 2" - 5"
Product : Metal
Thread Size: 4-40