Traxxas Tire & Wheel Assy, Glued (Sct

This is a pair of Traxxas SCT Split Spoke Front Wheels in Black
and Mud Terrain T/A KM2 Tires for use on the Slash 4X4.

FEATURES:
Fits front of the 2 wheel drive 1/10 scale Traxxas Slash
Black colored dual profile beadlock design wheel with chrome surface
    spokes
Off-road tread rubber tires with foam inserts

SUCHES AS:
Two Mud Terrain T/A KM2 Tires, Foam Inserts and SCT Split Spoke
    Front Wheels in Black

REQUIRES:
Setting up on front centers

SPECS:
Outer Size: 4.3" (109mm)
Width: 1.7" (43mm)
Hex size: 0.47" (12mm)

Want another terrific item to match the above pointed out item?




Requirements


Type: NiMH
Capability: 220mAh
Voltage: 4.8V
Port Type: Losi Micro
Number of Cells: 4-cell
Weight: 0.81 oz (22.9g)
Length: 1.96 in (49.8mm)
Width: 0.81 in (20.6mm)
Height: 0.41 in (10.5mm)









This item is frequently bought with the above pointed out item.



This is the Tire Wheel Assembly SCT Front/Rear
from Traxxas.

FEATURES:
Installed BG Goodrich tires with foams on Split Spoke Satin chrome,
    black beadlock design wheels in plastic

SUCHES AS:
Two installed BF Goodrich Mud Terrain T/A KM2 tires with foams
Two Split Spoke Satin Chrome, Black Beadlock Design Wheels

REQUIRES:
Installation

SPECS:
Width: 1.73" (44mm)
Size: 4.3" (110mm)
Hex Size: 14mm

Right here is a terrific item that lots of others have actually bought at the same time.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

The below item additionally sets actually well with the item being talked about.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel centers fit on the end of the stub axles.

FEATURES:
Replaces missing out on or damaged hex wheel centers
Centers are made from molded black plastic
Axle pins are steel

SUCHES AS:
Two Hex Wheel Centers
Two 2.5x12mm axle pins

REQUIRES:
Inserting pins through stub axles (4953) and positioning wheel centers in
    recessed area of axle carriers (4932).

This item praises the above talked about item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Want another terrific item to match the above pointed out item?



5200mAh 50C for under $50!
This 2-cell 5200mAh 50C lipo is best for 1/10 scale vehicles, trucks, and buggies! Functions a big capability for prolonged run times and an enormous C score so you'll have all the power you'll ever require. Suches as a Traxxas-type port on the discharge leads.
Features

High-end efficiency and reliability at an affordable cost
Perfect for 1/10 scale vehicles, trucks, and buggies
Terrific choice for the Traxxas Slash and Slash 4X4 models, E-Maxx Brushless Edition, E-Revo Brushless Edition, and Spartan
Functions a big capability for prolonged run times and an enormous C score so you'll have all the power you'll ever require
Suches as a Traxxas port on the discharge leads

Compatible With:

Traxxas Slash and Slash 4X4 models
Traxxas E-Maxx Brushless Edition
Traxxas E-Revo Brushless Edition
Traxxas SpartanTraxxas E-Maxx 1/10 scale 4WD Electric Monster Truck (#3903)
Traxxas E-Revo 1/10 scale 4WD Monster Truck (#5603)
Traxxas 1/10 Brushless Rally Racer (#7407)
Traxxas 1/10 scale brushless professional 4WD short course race trucks including: Slash 4x4 (#6068L), Platinum(# 6804R), and Ultimate (#6807)
Traxxas 1/10 scale brushless professional 2WD short course race trucks including: Slash (#5805) & (#5803), Slash VXL (#5807L)
Traxxas 1/10 scale 4WD Severe surface beast truck Top (#5607L)

Requirements

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 266 g