Traxxas Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Spur Gear/Telemetry Trigger Magnet

FUNCTIONS:
Black plastic and metal building and construction

CONSISTS OF:
Two various plasting holders
One disk-shaped magnet
Three 8mm screws
Three 10mm screws

SPECIFICATIONS:
Magnet size: 5mm
Magnet density: 2mm

The below product likewise pairs truly well with the product being talked about.

Xo-1 Connector Power Tab

This is the Power Tap Port for the Traxxas XO-1, TRAD42**.

FUNCTIONS:
Changes damaged power tap adapters

CONSISTS OF:
Port with Wire and Red 2-Pin Port and Zip Tie

This product compliments the main item below.

Mount, Temp Sensor (Electric Motors)-Wire Tie/Thermal Pad

This is the Temperature level Sensor Mount for the Traxxas TQi Telemetry System.

FEATURES:
For use with electrical powered Traxxas vehicles

CONSISTS OF:
Mount, Plastic Tie, and Thermal Pad

Regularly acquired with the product that you are currently reviewing.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

CONSISTS OF:
One 68T 0.8 metric pitch spur gear

NEEDS:
Setup on the car

SPECIFICATIONS:
Size: 2.16" (55mm)
Thickness: .23" (6mm)

This is a wonderful enhancement to the product currently being talked about.

Sensor Temperature/Voltage Short

This is the Short Temperature level and Voltage Sensor from Traxxas.

FEATURES:
Functions with the Traxxas Link system to show battery voltage and
    temperature level

CONSISTS OF:
Short Temperature level and Voltage Sensor

SPECIFICATIONS:
Length: 9.5" (241mm)

Numerous others have actually acquired this product along with the product that you are currently reviewing.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum building and construction

CONSISTS OF:
One slipper pressure plate
One slipper hub

NEEDS:
Setup onto car.

Here is another product that compliments the product being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Regularly acquired with the product that you are currently reviewing.

Xo-1 Sensor Rpm Long 3X4mm Bcs (2)

This is the Long RPM Sensor for the
XO-1 On-Road Automobile from Traxxas, TRAD42**.

FUNCTIONS:
Functions with the Traxxas Link system to show motor RPM

CONSISTS OF:
Long RPM Sensor with Zip Tie and 3x4mm Button Head Cap Screws

PECS: Length: 15" (381mm)

You will certainly enjoy this product if you have the product above stated.

Xo-1 Sensor Temperature & Voltage- Long

This is the Long Temperature level and Voltage Sensor from Traxxas.

FEATURES:
Functions with the Traxxas Link system to show battery voltage and
    temperature level

CONSISTS OF:
Long Temperature level and Voltage Sensor with Installing Screw

SPECIFICATIONS:
Length: 14" (356mm)

Want another great product to compliment the above stated product?

Sensor, Rpm (Short) / 3X4mm Bcs (2)

This is the Short RPM Sensor for the
XO-1 On-Road Automobile from Traxxas, TRAD42**.

FUNCTIONS:
Functions with the Traxxas Link system to show motor RPM

CONSISTS OF:
Short RPM Sensor with Zip Tie, 3x4mm Button Head Cap Screw and
    3x4mm Set Screw

SPECIFICATIONS:
Length: 7.5" (190mm)