Traxxas Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Stimulate Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal building and construction

INCLUDES:
Two different plasting holders
One disk-shaped magnet
3 8mm screws
3 10mm screws

SPECS:
Magnet size: 5mm
Magnet density: 2mm

The below thing additionally pairs really well with the thing being gone over.

Xo-1 Connector Power Tab

This is the Power Tap Connector for the Traxxas XO-1, TRAD42**.

FEATURES:
Replaces damaged power tap ports

INCLUDES:
Connector with Wire and Red 2-Pin Connector and Zip Tie

This thing compliments the main item right here.

Mount, Temp Sensor (Electric Motors)-Wire Tie/Thermal Pad

This is the Temperature level Sensor Mount for the Traxxas TQi Telemetry System.

FEATURES:
For use with electrical powered Traxxas cars

INCLUDES:
Mount, Plastic Tie, and Thermal Pad

Frequently gotten with the thing that you are presently reading about.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 68T 0.8 metric pitch spur gear

NEEDS:
Installation on the car

SPECS:
Size: 2.16" (55mm)
Thickness: .23" (6mm)

This is a great enhancement to the thing presently being gone over.

Sensor Temperature/Voltage Short

This is the Short Temperature level and Voltage Sensor from Traxxas.

FEATURES:
Functions with the Traxxas Link system to display battery voltage and
    temperature level

INCLUDES:
Short Temperature level and Voltage Sensor

SPECS:
Length: 9.5" (241mm)

Numerous others have gotten this thing in addition to the thing that you are presently reading about.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These are part of the slipper assembly.

FEATURES:
Aluminum building and construction

INCLUDES:
One slipper pressure plate
One slipper hub

NEEDS:
Installation onto car.

Right here is an additional thing that compliments the thing being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Frequently gotten with the thing that you are presently reading about.

Xo-1 Sensor Rpm Long 3X4mm Bcs (2)

This is the Long RPM Sensor for the
XO-1 On-Road Automobile from Traxxas, TRAD42**.

FEATURES:
Functions with the Traxxas Link system to display motor RPM

INCLUDES:
Long RPM Sensor with Zip Tie and 3x4mm Button Head Cap Screws

PECS: Length: 15" (381mm)

You will enjoy this thing if you have the thing above pointed out.

Xo-1 Sensor Temperature & Voltage- Long

This is the Long Temperature level and Voltage Sensor from Traxxas.

FEATURES:
Functions with the Traxxas Link system to display battery voltage and
    temperature level

INCLUDES:
Long Temperature level and Voltage Sensor with Installing Screw

SPECS:
Length: 14" (356mm)

Want an additional great thing to enhance the above stated thing?

Sensor, Rpm (Short) / 3X4mm Bcs (2)

This is the Short RPM Sensor for the
XO-1 On-Road Automobile from Traxxas, TRAD42**.

FEATURES:
Functions with the Traxxas Link system to display motor RPM

INCLUDES:
Short RPM Sensor with Zip Tie, 3x4mm Button Head Cap Screw and
    3x4mm Set Screw

SPECS:
Length: 7.5" (190mm)