Traxxas Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Stimulate Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal construction

INCLUDES:
2 different plasting holders
One disk-shaped magnet
Three 8mm screws
Three 10mm screws

SPECIFICATIONS:
Magnet size: 5mm
Magnet thickness: 2mm

The below thing also sets actually well with the thing being discussed.

Xo-1 Connector Power Tab

This is the Power Tap Adapter for the Traxxas XO-1, TRAD42**.

FEATURES:
Changes damaged power tap connectors

INCLUDES:
Adapter with Wire and Red 2-Pin Adapter and Zip Tie

This thing compliments the main item right here.

Mount, Temp Sensor (Electric Motors)-Wire Tie/Thermal Pad

This is the Temperature Sensing unit Mount for the Traxxas TQi Telemetry System.

FEATURES:
For use with electrical powered Traxxas automobiles

INCLUDES:
Mount, Plastic Tie, and Thermal Pad

Often acquired with the thing that you are currently checking out.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon construction, black in color
.8 metric pitch

INCLUDES:
One 68T 0.8 metric pitch spur gear

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Size: 2.16" (55mm)
Thickness: .23" (6mm)

This is a great enhancement to the thing currently being discussed.

Sensor Temperature/Voltage Short

This is the Short Temperature and Voltage Sensing unit from Traxxas.

FEATURES:
Functions with the Traxxas Link system to show battery voltage and
    temperature

INCLUDES:
Short Temperature and Voltage Sensing unit

SPECIFICATIONS:
Length: 9.5" (241mm)

Numerous others have acquired this thing in addition to the thing that you are currently checking out.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum construction

INCLUDES:
One slipper pressure plate
One slipper center

REQUIRES:
Installation onto vehicle.

Below is one more thing that compliments the thing being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Often acquired with the thing that you are currently checking out.

Xo-1 Sensor Rpm Long 3X4mm Bcs (2)

This is the Long RPM Sensing unit for the
XO-1 On-Road Car from Traxxas, TRAD42**.

FEATURES:
Functions with the Traxxas Link system to show motor RPM

INCLUDES:
Long RPM Sensing unit with Zip Tie and 3x4mm Button Head Cap Screws

PECS: Length: 15" (381mm)

You will enjoy this item if you have the item previously mentioned.

Xo-1 Sensor Temperature & Voltage- Long

This is the Long Temperature and Voltage Sensing unit from Traxxas.

FEATURES:
Functions with the Traxxas Link system to show battery voltage and
    temperature

INCLUDES:
Long Temperature and Voltage Sensing unit with Installing Screw

SPECIFICATIONS:
Length: 14" (356mm)

Want one more terrific thing to match the above mentioned thing?

Sensor, Rpm (Short) / 3X4mm Bcs (2)

This is the Short RPM Sensing unit for the
XO-1 On-Road Car from Traxxas, TRAD42**.

FEATURES:
Functions with the Traxxas Link system to show motor RPM

INCLUDES:
Short RPM Sensing unit with Zip Tie, 3x4mm Button Head Cap Screw and
    3x4mm Set Screw

SPECIFICATIONS:
Length: 7.5" (190mm)