Traxxas Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Long lasting steel building

INCLUDES:
8 pins

REQUIRES:
Assembly onto T/E-Maxx

SPECIFICATIONS:
Length: 65.3mm (2.57")
Diameter: 3.2mm (.13")

COMMENTS:
These suffice hinge pins for the entire automobile.

Here is one more product that praises the product being talked about.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all versions of the T-Maxx and E-Maxx
Nylon mix building, black in color
Locknuts used at the chassis and skid plate installing holes to
    securely lock bulkheads in location, decreasing the chance of damage

INCLUDES:
One each Left and Right Front Bulkhead
8 M3 Locknuts
Four M3 x 20mm Flathead Screws
Four M3 x 22mm Flathead Screws

This product praises the above talked about product.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all of the TRAXXAS kits that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, and so on...

FUNCTIONS:
Made of RULON

INCLUDES:
Twelve pegs ***Colors might vary from photo***

SPECIFICATIONS:
length - 3.5mm
size - 3mm

COMMENTS:
These pegs enter the holes on the side of the spur gear.

Get this product to improve the one you are reading about.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FUNCTIONS:
Fastens to front skidplate and holds front diff in location
Gray in color, built of hardened plastic

INCLUDES:
Left and Right Front Bulkheads for the T-Maxx 3.3

REQUIRES:
Fastening to skidplate and differential

COMMENTS:
For the 3.3 version just.

This product praises the main item below.

Skidplate Frt Grey

This is the Front Plastic Skidplate for the T-Maxx 3.3.

FUNCTIONS:
Attaches to and safeguards chassis and supports the front bulkhead
Skidplate is gray in color

INCLUDES:
Skidplate and stainless steel plate

REQUIRES:
Setting up on chassis with 4 3x12mm countersunk maker screws
    (not consisted of, use TRAC2552

COMMENTS:
For the 3.3 version just. For the original T-Maxx Skidplate, order
    TRAC4037.

You will certainly like this thing if you have the thing previously pointed out.

Steering Bellcranks E/T Maxx

    This is a Pair of the Steering Bellcranks for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.
These bellcranks bolt to the chassis and the bellcrank posts connect
to the guiding turnbuckles.

FEATURES:
Replaces stock guiding bellcranks.
All parts are plastic, except for the shoulder screws which are
    steel.

INCLUDES:
2 guiding bellcranks
Four 5x8x2.5mm bellcrank bushings.
Two bellcrank post spacers.
Two 3x8mm shoulder screws.
One drag link.

REQUIRES:
Attaching bellcranks to the chassis and attaching drag connect to the
    guiding turnbuckles.

Get this product to improve the one you are reading about.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel centers fit on the end of the stub axles.

FEATURES:
Replaces missing or damaged hex wheel centers
Hubs are made of molded black plastic
Axle pins are steel

INCLUDES:
2 Hex Wheel Hubs
2 2.5x12mm axle pins

REQUIRES:
Inserting pins through stub axles (4953) and putting wheel centers in
    recessed area of axle carriers (4932).