Traxxas Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Resilient steel building

CONSISTS OF:
8 pins

NEEDS:
Assembly onto T/E-Maxx

SPECS:
Length: 65.3mm (2.57")
Size: 3.2mm (.13")

REMARKS:
These are enough hinge pins for the whole vehicle.

Right here is another thing that praises the thing being discussed.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend building, black in color
Locknuts utilized at the chassis and skid plate mounting holes to
    firmly lock bulkheads in location, minimizing the opportunity of breakage

CONSISTS OF:
One each Left and Right Front Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This thing praises the above discussed thing.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all of the TRAXXAS sets that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, and so on...

FEATURES:
Made of RULON

CONSISTS OF:
Twelve pegs ***Colors might differ from photo***

SPECS:
length - 3.5mm
size - 3mm

REMARKS:
These pegs enter the holes on the side of the spur gear.

Get this thing to enhance the one you read around.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FEATURES:
Fastens to front skidplate and holds front diff in location
Gray in color, constructed of solidified plastic

CONSISTS OF:
Left and Right Front Bulkheads for the T-Maxx 3.3

NEEDS:
Securing to skidplate and differential

REMARKS:
For the 3.3 variation just.

This thing praises the main item right here.

Skidplate Frt Grey

This is the Front Plastic Skidplate for the T-Maxx 3.3.

FEATURES:
Connect to and protects chassis and supports the front bulkhead
Skidplate is gray in color

CONSISTS OF:
Skidplate and stainless-steel plate

NEEDS:
Setting up on chassis with 4 3x12mm countersunk device screws
    (not consisted of, use TRAC2552

REMARKS:
For the 3.3 variation just. For the initial T-Maxx Skidplate, order
    TRAC4037.

You will certainly love this thing if you have the thing just above stated.

Steering Bellcranks E/T Maxx

    This is a Set of the Steering Bellcranks for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Beast Trucks.
These bellcranks bolt to the chassis and the bellcrank posts link
to the guiding turnbuckles.

FEATURES:
Replaces stock guiding bellcranks.
All components are plastic, except for the shoulder screws which are
    steel.

INCLUDES:
2 guiding bellcranks
4 5x8x2.5mm bellcrank bushings.
Two bellcrank post spacers.
Two 3x8mm shoulder screws.
One drag link.

REQUIRES:
Attaching bellcranks to the chassis and attaching drag connect to the
    guiding turnbuckles.

Get this thing to enhance the one you read around.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel hubs fit on the end of the stub axles.

FEATURES:
Replaces missing or damaged hex wheel hubs
Hubs are made from molded black plastic
Axle pins are steel

CONSISTS OF:
2 Hex Wheel Hubs
2 2.5x12mm axle pins

NEEDS:
Placing pins through stub axles (4953) and placing wheel hubs in
    recessed area of axle carriers (4932).