Traxxas Suspension Pin Set (Front Or R

This is the Suspension Pin Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building
Silver in color

CONSISTS OF:
Two 2x46mm Pins
4 2x14mm Pins

NEEDS:
Setup through suspension components

Here is a great product that numerous others have actually bought at the very same time.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Front Skidplate
One Rear Skidplate
One Transmission Skid Plate
Two Steering Servo Guards
One Steering Servo Cover Plate

NEEDS:
Setup on the vehicle

This product compliments the main item here.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for usage on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
Two front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

NEEDS:
Setup over front diff assembly

This is a great enhancement to the product presently being talked about.

Steering Arm (Upper & Lower)/

This is the Steering Arm for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
Two Ball Studs
Front and Rear Shock Mounts
4 2.5x18mm Cap Head Screws

NEEDS:
Setup on the vehicle

Here is a great product that numerous others have actually bought at the very same time.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Posts for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

NEEDS:
Setup on the vehicle

Numerous others have actually acquired this product along with the product that you are presently reading about.

Chassis, 1/16 E-Revo/Slash

This is the Chassis for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Grey in color

CONSISTS OF:
One Chassis

NEEDS:
Setup on vehicle

SPECS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

The below product also pairs really well with the product being talked about.

Bulkhead Tie Bars, Front & Rea

These are the Front and Rear Bulkhead Tie Bars for usage on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Aluminum building
Blue in color

CONSISTS OF:
One Front Bulkhead Tie Bar
One Rear Bulkhead Tie Bar
One 2.5x6mm Cap Head Screw

NEEDS:
Setup on the vehicle

This is a great enhancement to the product presently being talked about.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May also be utilized in any vehicle where this size bearing is needed

CONSISTS OF:
Two Ball Bearings

NEEDS:
Setup on the vehicle

SPECS:
Outer Size: 8mm (0.31")
Inner Size: 4mm (0.16")
Width: 3mm (0.12")

This product compliments the main item here.

Ball Bearings, Blue Rubber Sea

These are the 8x12mm Blue Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Ball bearings
Blue rubber sealed

CONSISTS OF:
Two Ball Bearings

NEEDS:
Setup on the vehicle

SPECS:
Outer Size: 12mm (0.47")
Inner Size: 8mm (0.31")
Width: 3.5mm (0.14")