Traxxas Suspension Pin Set (Front Or R

This is the Suspension Pin Set for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building
Silver in color

CONSISTS OF:
2 2x46mm Pins
4 2x14mm Pins

REQUIRES:
Setup through suspension components

Right here is a wonderful thing that several others have bought at the exact same time.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Front Skidplate
One Back Skidplate
One Transmission Skid Plate
2 Guiding Servo Guards
One Steering Servo Cover Plate

REQUIRES:
Setup on the vehicle

This thing compliments the main item below.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for use on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
2 front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

REQUIRES:
Setup over front diff assembly

This is a wonderful addition to the thing currently being talked about.

Steering Arm (Upper & Lower)/

This is the Steering Arm for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
2 Ball Studs
Front and Rear Shock Installs
4 2.5x18mm Cap Head Screws

REQUIRES:
Setup on the vehicle

Right here is a wonderful thing that several others have bought at the exact same time.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
2 Front Body Posts
2 Rear Body Posts

REQUIRES:
Setup on the vehicle

Several others have acquired this thing in addition to the thing that you are currently reviewing.

Chassis, 1/16 E-Revo/Slash

This is the Chassis for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Grey in color

CONSISTS OF:
One Chassis

REQUIRES:
Setup on vehicle

SPECIFICATIONS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

The listed below thing likewise sets truly well with the thing being talked about.

Bulkhead Tie Bars, Front & Rea

These are the Front and Back Bulkhead Tie Bars for use on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Aluminum building
Blue in color

CONSISTS OF:
One Front Bulkhead Tie Bar
One Back Bulkhead Tie Bar
One 2.5x6mm Cap Head Screw

REQUIRES:
Setup on the vehicle

This is a wonderful addition to the thing currently being talked about.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for use on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May also be used in any vehicle where this size bearing is needed

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Setup on the vehicle

SPECIFICATIONS:
Outer Diameter: 8mm (0.31")
Inner Diameter: 4mm (0.16")
Width: 3mm (0.12")

This thing compliments the main item below.

Ball Bearings, Blue Rubber Sea

These are the 8x12mm Blue Rubber Sealed Ball Bearings for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Ball bearings
Blue rubber sealed

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Setup on the vehicle

SPECIFICATIONS:
Outer Diameter: 12mm (0.47")
Inner Diameter: 8mm (0.31")
Width: 3.5mm (0.14")