Traxxas Suspension Pin Set, Front Or Rear Corner (Hardened Steel), X-Ma

    This is the Front or Rear Corner Suspension Pin Set
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Steel building and construction
Fastens suspension arms to chassis and to front and rear uprights

INCLUDES:
One 4x85mm Pin
Three 4x47mm Pins
Two 4x33mm Pins

SPECS:
Diameter: 0.16" (4mm)
Length: 3.3" (85mm), 1.8" (47mm), 1.3" (33mm)

This is a superb addition to the product currently being talked about.

Suspension Arm, Upper (2), X-Maxx

This is a set of Upper Suspension Arms
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Molded composite plastic building and construction
Fits both front and rear suspension

INCLUDES:
Left and Right Upper Suspension Arms

Below is another product that compliments the product being talked about.

Suspension Arm, Lower (Left) (1), X-Maxx

This is the Lower Left Suspension Arm
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Molded composite plastic building and construction
Fits lower left front suspension
Fastens to lower section of caster block and front lower bulkhead

INCLUDES:
Lower Left Suspension Arm

REMARKS:
Not interchangeable with ideal side. For the Lower Right Suspension
    Arm, order TRAC7730.

Below is another product that compliments the product being talked about.

Caster Blocks (C-Hubs), Left & Right, X-Maxx

This is the Left and Right Caster Blocks
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Molded composite plastic building and construction
Supports the driveshaft and stub axles, and is kept in place by the
    upper and lower suspension arms

INCLUDES:
Left and Right Caster Blocks

This product compliments the main item here.

Driveshaft, Steel Constant-Velocity (Shaft Only, 160Mm), X-Maxx

These are the Front and Back Motor Mounts
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Two-piece molded composite plastic building and construction
Connects to rear bulkhead and fastens to both ends of motor

INCLUDES:
Front and Back Motor Mounts
Two Steel Pins

The listed below product additionally pairs truly well with the product being talked about.

Carriers, Stub Axle (Left & Right), X-Maxx

These are the Left and Right Rear Stub Axle Carriers
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Molded composite plastic building and construction
Holds the 15x24x4mm and 20x27x4mm ball bearings in place and
    supports the rear stub axles

INCLUDES:
Left and Right Rear Stub Axle Carriers

Frequently gotten with the product that you are currently checking out.

Shock Shafts, Gtx, 110Mm (Assembled With Rod Ends & Hollow Balls

These are the Shock Shafts for the GTX Shocks
used on the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Steel building and construction with composite plastic rod ends and pressed-in
    ball links

INCLUDES:
Two each; Shock Shafts with Rod Ends and Ball Links

Want another fantastic product to enhance the above stated product?

Steering Blocks, Left & Right, X-Maxx

This is the Left and Right Steering Blocks
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Molded composite plastic building and construction
Holds stub axles in place, and links toe connect to guiding
    assembly

INCLUDES:
Left and Right Steering Block

Want another fantastic product to enhance the above stated product?

Suspension Pin Set, Shock Mount (Front Or Rear, Hardened Steel),

This is the Shock Mount Suspension Pin Set
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Steel building and construction
Fastens bottom of shocks to lower front and rear suspension arms

INCLUDES:
Two each; 4 x 25.8mm Pins, 4 x 38mm Pins

SPECS:
Diameter: 0.16" (4mm)
Length: 1.01" (25.8mm), 1.5" (38mm)