Traxxas Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel building
Silver in color

INCLUDES:
4 51.5mm pins
4 30mm pins

REQUIRES:
Setup on the Slash 4x4

This is a superb enhancement to the thing currently being gone over.

Bulkhead Tie Bars, Front & Rea

This is the replacement Bulkhead Tie Bars for the Traxxas Slash 4X4.

FUNCTIONS:
Aluminum building
Anodized blue in color

INCLUDES:
Two bulkhead tie bars (front and back)

REQUIRES:
Setup on the Slash 4X4

This thing compliments the above gone over thing.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
Two Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Thickness: 0.31" (8mm)

REMARKS:
Also available in Blue (RPMC0705)

This thing compliments the main item right here.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on car

Often acquired with the thing that you are currently reading about.

3 X 15Mm Button Hex Screw (6)

This is a plan of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Used on the Traxxas Revo beast truck, can also be utilized in any
    application where a 3x15mm button head screw is required

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

This thing compliments the above gone over thing.

3 X 20Mm Button Hex Screw (6)

This is a plan of six 3x20mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Used on the Traxxas Revo beast truck, can also be utilized in any
    application where a 3x20mm button head screw is required

INCLUDES:
Six 3x20mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 20mm
Diameter: 3mm

This thing compliments the above gone over thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

The listed below thing also pairs truly well with the thing being gone over.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Building and construction
Blue Rubber Sealed

INCLUDES:
Two 8mm x 16mm Rubber Sealed Bearings

REQUIRES:
Assembly onto Automobile

SPECS:
Inner Diameter: 8mm (0.31")
Outer Diameter: 16mm (0.62")
Thickness: 5mm (0.19")

The listed below thing also pairs truly well with the thing being gone over.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

REQUIRES:
Assembly to car

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are utilized to support the Main Clutch (one needed).