Traxxas Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made of stainless-steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electric
(not Nitro) Rustler
Likewise called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Often purchased with the product that you are presently checking out.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building and construction

CONSISTS OF:
Two Blocks

REQUIRES:
Traxxas Rustler or Stampede

Want another fantastic product to match the above stated product?

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks mount to the front A-arms and is exactly what the
guiding knuckles connect to.

FEATURES:
Nylon building and construction, black in color
Stamped right and delegated insure proper setup

CONSISTS OF:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly in between A-arms and guiding knuckles

Want another fantastic product to match the above stated product?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Here is a fantastic product that many others have bought at the exact same time.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic building and construction
Black in color

CONSISTS OF:
One left and right steering blocks

REQUIRES:
5x11x4mm bearings (DTXC1547)

Here is a fantastic product that many others have bought at the exact same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Front bearing (center) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

This product is regularly purchased with the above stated product.

Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are built of chrome-plated steel and used to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
Two 3mm x 46mm screw pins
Two 3mm x 40mm screw pins
Two 3mm x 29mm screw pins
Two 2mm x 27mm screw pins
Two 2mm x 24mm screw pins

The below product also sets truly well with the product being gone over.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Vehicle and Protects the Chassis.

FEATURES:
Long lasting Plastic Building and construction
Black in Color

CONSISTS OF:
One Bumper
One Team RPM Decal

REQUIRES:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

COMMENTS:
The Factory Number is #81162

This product is regularly purchased with the above stated product.

CNC Mach Alum Caster Blocks Stampede/Rustler/Sl

This product is regularly purchased with the above stated product.

Large Servo Saver

This is a big servo saver that can be used in Traxxas automobiles or any car that
needs a big design servo saver.
FEATURES:
Difficult white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that allow you to mount the saver
on the majority of popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise consisted of is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for installing the guiding linkages.