Traxxas Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made from stainless steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Likewise called the vertical kingpin

INCLUDES:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Frequently bought with the product that you are presently reading about.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building

INCLUDES:
2 Blocks

NEEDS:
Traxxas Rustler or Stampede

Want an additional fantastic product to compliment the above mentioned product?

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is what the
guiding knuckles attach to.

FEATURES:
Nylon building, black in color
Stamped right and delegated guarantee appropriate setup

INCLUDES:
2 RPM 30° Front Caster Blocks

NEEDS:
Assembly in between A-arms and guiding knuckles

Want an additional fantastic product to compliment the above mentioned product?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Below is a fantastic product that lots of others have actually bought at the exact same time.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

INCLUDES:
One left and right steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

Below is a fantastic product that lots of others have actually bought at the exact same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2 Front bearing (center) carriers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

This product is often bought with the above mentioned product.

Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are constructed of chrome-plated steel and utilized to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
2 3mm x 46mm screw pins
2 3mm x 40mm screw pins
2 3mm x 29mm screw pins
2 2mm x 27mm screw pins
2 2mm x 24mm screw pins

The listed below product also pairs really well with the product being discussed.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Car and Protects the Chassis.

FEATURES:
Long lasting Plastic Building
Black in Color

INCLUDES:
One Bumper
One Group RPM Decal

NEEDS:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

This product is often bought with the above mentioned product.

CNC Mach Alum Caster Blocks Stampede/Rustler/Sl

This product is often bought with the above mentioned product.

Large Servo Saver

This is a big servo saver that can be utilized in Traxxas cars or any vehicle that
requires a big style servo saver.
FEATURES:
Tough white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that enable you to mount the saver
on a lot of popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise consisted of is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for installing the guiding linkages.