Traxxas Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made of stainless-steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Likewise called the vertical kingpin

INCLUDES:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Regularly purchased with the thing that you are currently reviewing.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building and construction

INCLUDES:
Two Blocks

NEEDS:
Traxxas Rustler or Stampede

Want an additional wonderful thing to enhance the above mentioned thing?

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks mount to the front A-arms and is exactly what the
steering knuckles attach to.

FEATURES:
Nylon construction, black in color
Stamped right and left to guarantee correct setup

INCLUDES:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and steering knuckles

Want an additional wonderful thing to enhance the above mentioned thing?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Right here is a wonderful thing that many others have actually bought at the same time.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

INCLUDES:
One left and right steering blocks

NEEDS:
5x11x4mm bearings (DTXC1547)

Right here is a wonderful thing that many others have actually bought at the same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

INCLUDES:
Two Front bearing (hub) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

This thing is frequently purchased with the above mentioned thing.

Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are built of chrome-plated steel and utilized to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
Two 3mm x 46mm screw pins
Two 3mm x 40mm screw pins
Two 3mm x 29mm screw pins
Two 2mm x 27mm screw pins
Two 2mm x 24mm screw pins

The below thing also sets truly well with the thing being reviewed.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Car and Safeguards the Chassis.

FEATURES:
Resilient Plastic Building and construction
Black in Color

INCLUDES:
One Bumper
One Group RPM Decal

NEEDS:
Installation onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

This thing is frequently purchased with the above mentioned thing.

CNC Mach Alum Caster Blocks Stampede/Rustler/Sl

This thing is frequently purchased with the above mentioned thing.

Large Servo Saver

This is a big servo saver that can be utilized in Traxxas cars or any car that
needs a big design servo saver.
FEATURES:
Hard white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that permit you to mount the saver
on most popular servos consisting of: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise included is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for installing the steering linkages.