Traxxas Suspension Arms Rear Slash 2Wd Rustler Stampede F/R Slash 4X4

This is the Left and Right Suspension Arms for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic construction
Front or rear application

INCLUDES:
One left suspension arm
One ideal suspension arm

NEEDS:
Setup on suspension assembly

SPECIFICATIONS:
Length: 100mm (3.94")
Width: 45mm (1.77")
Density: 11.5mm (0.45")

Right here is a excellent item that several others have purchased the same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will enjoy this item if you have the item above stated.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

INCLUDES:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with ports

NEEDS:
Setting up in automobile

SPECIFICATIONS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not offered

This item is frequently purchased with the above stated item.

Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic construction

INCLUDES:
Two Nerf Bars for the Traxxas Slash

NEEDS:
Setup onto Vehicle

Frequently purchased with the item that you are currently reading about.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

Get this item to enhance the one you are reading about.

3 X 15Mm Button Hex Screw (6)

This is a package of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Utilized on the Traxxas Revo beast truck, can likewise be utilized in any
    application where a 3x15mm button head screw is needed

INCLUDES:
6 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm

Get this item to enhance the one you are reading about.

30Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil utilized with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in hot weather or thicken up in cold weather

INCLUDES:
One bottle of silicone oil

SPECIFICATIONS:
30wt (the greater the weight number the thicker the oil)
2 oz. bottle

Lots of others have purchased this item together with the item that you are currently reading about.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/16 scale automobile applications
Prewired with Traxxas high existing connector

INCLUDES:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Port

NEEDS:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 11.1V
Rated Capacity: 1300mAh
Release Rating: 25C continuous
Dimensions: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Port: ElectriFly
Watt Hours: 14Wh

REMARKS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER enable to Release listed below 2.5V per cell
NEVER disassemble or customize pack wiring in any method or leak cells
NEVER place on flammable products or leave unattended throughout
    charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS stay out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm