Traxxas Suspension Arms Rear Slash 2Wd Rustler Stampede F/R Slash 4X4

This is the Left and Right Suspension Arms for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic construction
Front or rear application

INCLUDES:
One left suspension arm
One ideal suspension arm

NEEDS:
Setup on suspension assembly

SPECIFICATIONS:
Length: 100mm (3.94")
Width: 45mm (1.77")
Density: 11.5mm (0.45")

Here is a great item that many others have actually purchased the exact same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

You will love this product if you have the product just above stated.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

INCLUDES:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with ports

NEEDS:
Installing in car

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specifications such as RPM are not offered

This item is often gotten with the above stated item.

Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic construction

INCLUDES:
2 Nerf Bars for the Traxxas Slash

NEEDS:
Setup onto Car

Often gotten with the item that you are currently reading about.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

Get this item to boost the one you are reading around.

3 X 15Mm Button Hex Screw (6)

This is a plan of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Utilized on the Traxxas Revo beast truck, can likewise be used in any
    application where a 3x15mm button head screw is required

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Diameter: 3mm

Get this item to boost the one you are reading around.

30Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil used with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in hot weather or thicken up in winter

INCLUDES:
One bottle of silicone oil

SPECIFICATIONS:
30wt (the greater the weight number the thicker the oil)
2 oz. bottle

Lots of others have actually gotten this item in addition to the item that you are currently reading about.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/16 scale automobile applications
Prewired with Traxxas high existing port

INCLUDES:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

NEEDS:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 11.1V
Rated Capacity: 1300mAh
Discharge Rating: 25C constant
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Connector: ElectriFly
Watt Hours: 14Wh

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER take apart or modify pack circuitry in any method or puncture cells
NEVER location on combustible products or leave ignored during
    charging
ALWAYS Charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm