Traxxas Suspension Arms Rear Slash 2Wd Rustler Stampede F/R Slash 4X4

This is the Left and Right Suspension Arms for the Traxxas Slash 4x4.

FUNCTIONS:
Solidified plastic building and construction
Front or rear application

CONSISTS OF:
One left suspension arm
One right suspension arm

NEEDS:
Installation on suspension assembly

SPECS:
Length: 100mm (3.94")
Width: 45mm (1.77")
Density: 11.5mm (0.45")

Here is a terrific item that many others have bought at the very same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly enjoy this thing if you have the thing earlier mentioned.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

CONSISTS OF:
Traxxas Titan 550 Motor, two capacitors and two leads with ports

NEEDS:
Installing in car

SPECS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

This item is frequently purchased with the above stated item.

Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic building and construction

CONSISTS OF:
2 Nerf Bars for the Traxxas Slash

NEEDS:
Installation onto Vehicle

Often purchased with the item that you are presently reviewing.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

Get this item to improve the one you are reading around.

3 X 15Mm Button Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building and construction, Black in color
Utilized on the Traxxas Revo monster truck, can likewise be utilized in any
    application where a 3x15mm button head screw is required

CONSISTS OF:
6 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

Get this item to improve the one you are reading around.

30Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil utilized with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in hot weather condition or thicken up in cold weather

CONSISTS OF:
One bottle of silicone oil

SPECS:
30wt (the greater the weight number the thicker the oil)
2 oz. bottle

Several others have purchased this item in addition to the item that you are presently reviewing.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/16 scale automobile applications
Prewired with Traxxas high present port

CONSISTS OF:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Port

NEEDS:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 11.1V
Rated Capability: 1300mAh
Release Rating: 25C continuous
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Port: ElectriFly
Watt Hours: 14Wh

COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER allow to Release below 2.5V per cell
NEVER dismantle or modify pack circuitry in any method or puncture cells
NEVER location on flammable products or leave ignored throughout
    charging
ALWAYS Charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm