Traxxas Suspension Arms Rear Slash 2Wd Rustler Stampede F/R Slash 4X4

This is the Left and Right Suspension Arms for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building
Front or rear application

INCLUDES:
One left suspension arm
One right suspension arm

NEEDS:
Setup on suspension assembly

SPECS:
Length: 100mm (3.94")
Width: 45mm (1.77")
Density: 11.5mm (0.45")

Here is a wonderful thing that lots of others have purchased the same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly love this thing if you have the thing earlier stated.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and connectors

INCLUDES:
Traxxas Titan 550 Motor, two capacitors and two leads with connectors

NEEDS:
Installing in automobile

SPECS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

This thing is frequently purchased with the above pointed out thing.

Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic building

INCLUDES:
2 Nerf Bars for the Traxxas Slash

NEEDS:
Setup onto Car

Often purchased with the thing that you are currently checking out.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, also work well
with Associated aluminum shocks. Qty-4

Get this thing to improve the one you are reading around.

3 X 15Mm Button Hex Screw (6)

This is a bundle of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Used on the Traxxas Revo beast truck, can also be used in any
    application where a 3x15mm button head screw is needed

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Size: 3mm

Get this thing to improve the one you are reading around.

30Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil used with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in hot weather or thicken up in winter

INCLUDES:
One bottle of silicone oil

SPECS:
30wt (the higher the weight number the thicker the oil)
2 oz. bottle

Several others have purchased this thing together with the thing that you are currently checking out.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/16 scale car applications
Prewired with Traxxas high existing connector

INCLUDES:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

NEEDS:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 11.1V
Ranked Capacity: 1300mAh
Discharge Score: 25C continuous
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Connector: ElectriFly
Watt Hours: 14Wh

COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or customize pack circuitry in any method or puncture cells
NEVER place on combustible products or leave ignored throughout
    charging
ALWAYS Charge in a fire-resistant area
ALWAYS set charger's output volts to match battery volts
ALWAYS shut out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm