Traxxas Suspension Arms Rear Slash 2Wd Rustler Stampede F/R Slash 4X4

This is the Left and Right Suspension Arms for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building
Front or rear application

CONSISTS OF:
One left suspension arm
One best suspension arm

NEEDS:
Installation on suspension assembly

SPECIFICATIONS:
Length: 100mm (3.94")
Width: 45mm (1.77")
Density: 11.5mm (0.45")

Here is a wonderful item that several others have actually bought at the same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will enjoy this product if you have the product previously stated.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

CONSISTS OF:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with ports

NEEDS:
Installing in vehicle

SPECIFICATIONS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specifications such as RPM are not provided

This item is frequently gotten with the above mentioned item.

Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic building

CONSISTS OF:
2 Nerf Bars for the Traxxas Slash

NEEDS:
Installation onto Vehicle

Frequently gotten with the item that you are currently reading about.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, also work well
with Associated aluminum shocks. Qty-4

Get this item to enhance the one you are reading about.

3 X 15Mm Button Hex Screw (6)

This is a bundle of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo beast truck, can also be utilized in any
    application where a 3x15mm button head screw is needed

CONSISTS OF:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm

Get this item to enhance the one you are reading about.

30Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil utilized with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in hot weather condition or thicken up in cold weather

CONSISTS OF:
One bottle of silicone oil

SPECIFICATIONS:
30wt (the greater the weight number the thicker the oil)
2 oz. bottle

Many others have actually gotten this item in addition to the item that you are currently reading about.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/16 scale car applications
Prewired with Traxxas high current adapter

CONSISTS OF:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

NEEDS:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Rated Capacity: 1300mAh
Release Score: 25C constant
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Stabilizing Connector: ElectriFly
Watt Hours: 14Wh

COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER allow to Release below 2.5V per cell
NEVER take apart or customize pack circuitry in any way or puncture cells
NEVER location on flammable products or leave ignored during
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm