Traxxas Suspension Arms Rear Slash 2Wd Rustler Stampede F/R Slash 4X4

This is the Left and Right Suspension Arms for the Traxxas Slash 4x4.

FUNCTIONS:
Solidified plastic construction
Front or rear application

CONSISTS OF:
One left suspension arm
One best suspension arm

REQUIRES:
Setup on suspension assembly

SPECS:
Length: 100mm (3.94")
Width: 45mm (1.77")
Thickness: 11.5mm (0.45")

Here is a great item that numerous others have purchased the very same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will enjoy this thing if you have the thing above stated.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

CONSISTS OF:
Traxxas Titan 550 Motor, two capacitors and two leads with ports

REQUIRES:
Setting up in vehicle

SPECS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specifications such as RPM are not offered

This item is often purchased with the above pointed out item.

Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic construction

CONSISTS OF:
Two Nerf Bars for the Traxxas Slash

REQUIRES:
Setup onto Vehicle

Often purchased with the item that you are currently checking out.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

Get this item to enhance the one you are reading about.

3 X 15Mm Button Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Used on the Traxxas Revo monster truck, can likewise be used in any
    application where a 3x15mm button head screw is needed

CONSISTS OF:
6 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

Get this item to enhance the one you are reading about.

30Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil used with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in hot weather condition or thicken up in cold weather

CONSISTS OF:
One bottle of silicone oil

SPECS:
30wt (the greater the weight number the thicker the oil)
2 oz. bottle

Lots of others have purchased this item together with the item that you are currently checking out.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/16 scale automobile applications
Prewired with Traxxas high existing adapter

CONSISTS OF:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Port

REQUIRES:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 11.1V
Rated Capability: 1300mAh
Release Score: 25C constant
Dimensions: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Port: ElectriFly
Watt Hours: 14Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Release below 2.5V per cell
NEVER take apart or modify pack electrical wiring in any way or puncture cells
NEVER location on combustible products or leave unattended throughout
    charging
ALWAYS Charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY stay out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm