Traxxas Suspension Arms Guards Front Stampede 4X4

These are the Front Suspension Arm Guards for the Traxxas Stampede 4x4 VXL.

FEATURES:
Composite plastic building and construction
Black in color

CONSISTS OF:
2 front suspension arm guards
2 guard spacers
2 hollow balls
8 3x16mm button head cap screws

REQUIRES:
Setup onto front suspension

This thing is frequently gotten with the above discussed thing.

Stampede 4X4 Suspension Arm Guards Rear

This is the Rear Suspension Arm Guards for the Stampede and Slash 4x4

FEATURES:
Black plastic building and construction

CONSISTS OF:
Rear suspension arm guards (2)
Guard spacers(2)
Hallow Balls (2)
3x16mm BCS (2)

REQUIRES:
Setup on vehicle

Here is a fantastic thing that lots of others have purchased the exact same time.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

CONSISTS OF:
2 Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Thickness: 0.31" (8mm)

COMMENTS:
Likewise readily available in Blue (RPMC0705)

Often gotten with the thing that you are presently checking out.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Blue in color
Plastic constrution

CONSISTS OF:
(2) Front/Rear A-Arms

REQUIRES:
Setup on front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Thickness: 0.31" (8mm)

COMMENTS:
Likewise readily available in Black (RPMC0702)

Here is a fantastic thing that lots of others have purchased the exact same time.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs allow a variety of bodies
    to be used consisting of rally car bodies
Constructed of nylon, black in color
Screw-on body install system removes metal clips

CONSISTS OF:
Front and Rear Body Mounts and Publishes with Installing Hardware

Here is one more thing that praises the thing being discussed.

Spring Shock White GTR Long 0.892 Blue (2)

This is the set of Traxxas Long GTR Shock Springs
with 0.892 Blue Compression Rate.

FEATURES:
Steel building and construction, white in color
Dab of paint on end of spring indicates compression rate

CONSISTS OF:
2 Long 0.892 Blue Rate GTR Shock Springs

SPECIFICATIONS:
Length: 1.8" (45mm)
Wire Diameter: 0.043" (1.1mm)

The below thing additionally pairs truly well with the thing being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Here is a fantastic thing that lots of others have purchased the exact same time.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building and construction
Protected with blue rubber seals

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Assembly to vehicle

SPECIFICATIONS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are used to support the Primary Clutch (one required).