Traxxas Suspension Arms Guards Front Stampede 4X4

These are the Front Suspension Arm Guards for the Traxxas Stampede 4x4 VXL.

FEATURES:
Composite plastic building
Black in color

CONSISTS OF:
Two front suspension arm guards
Two guard spacers
Two hollow balls
Eight 3x16mm button head cap screws

REQUIRES:
Installation onto front suspension

This item is regularly purchased with the above mentioned item.

Stampede 4X4 Suspension Arm Guards Rear

This is the Rear Suspension Arm Guards for the Stampede and Slash 4x4

FUNCTIONS:
Black plastic building

CONSISTS OF:
Rear suspension arm guards (2)
Guard spacers(2)
Hallow Balls (2)
3x16mm BCS (2)

REQUIRES:
Installation on automobile

Below is a excellent item that several others have actually purchased the exact same time.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Thickness: 0.31" (8mm)

COMMENTS:
Also readily available in Blue (RPMC0705)

Frequently purchased with the item that you are presently reviewing.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Blue in color
Plastic constrution

CONSISTS OF:
(2) Front/Rear A-Arms

REQUIRES:
Installation on front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Thickness: 0.31" (8mm)

COMMENTS:
Also readily available in Black (RPMC0702)

Below is a excellent item that several others have actually purchased the exact same time.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a wide array of bodies
    to be utilized consisting of rally car bodies
Constructed of nylon, black in color
Screw-on body mount system removes metal clips

CONSISTS OF:
Front and Rear Body Installs and Posts with Installing Hardware

Below is an additional item that compliments the item being discussed.

Spring Shock White GTR Long 0.892 Blue (2)

This is the set of Traxxas Long GTR Shock Springs
with 0.892 Blue Compression Rate.

FEATURES:
Steel building, white in color
Dab of paint on end of spring indicates compression rate

CONSISTS OF:
Two Long 0.892 Blue Rate GTR Shock Springs

SPECS:
Length: 1.8" (45mm)
Wire Diameter: 0.043" (1.1mm)

The listed below item additionally sets really well with the item being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Below is a excellent item that several others have actually purchased the exact same time.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Assembly to automobile

SPECS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are utilized to support the Main Clutch (one required).