Traxxas Suspension Arms Guards Front Stampede 4X4

These are the Front Suspension Arm Guards for the Traxxas Stampede 4x4 VXL.

FEATURES:
Composite plastic building and construction
Black in color

CONSISTS OF:
2 front suspension arm guards
2 guard spacers
2 hollow balls
Eight 3x16mm button head cap screws

REQUIRES:
Setup onto front suspension

This product is often gotten with the above pointed out product.

Stampede 4X4 Suspension Arm Guards Rear

This is the Rear Suspension Arm Guards for the Stampede and Slash 4x4

FUNCTIONS:
Black plastic building and construction

CONSISTS OF:
Rear suspension arm guards (2)
Guard spacers(2)
Hallow Balls (2)
3x16mm BCS (2)

REQUIRES:
Setup on automobile

Right here is a terrific product that many others have bought at the exact same time.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
2 Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Density: 0.31" (8mm)

REMARKS:
Also readily available in Blue (RPMC0705)

Frequently gotten with the product that you are currently checking out.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Heavy Responsibility Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Blue in color
Plastic constrution

CONSISTS OF:
(2) Front/Rear A-Arms

REQUIRES:
Setup on front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Density: 0.31" (8mm)

REMARKS:
Also readily available in Black (RPMC0702)

Right here is a terrific product that many others have bought at the exact same time.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a wide range of bodies
    to be used including rally vehicle bodies
Constructed of nylon, black in color
Screw-on body mount system eliminates metal clips

CONSISTS OF:
Front and Rear Body Mounts and Publishes with Installing Hardware

Right here is an additional product that compliments the product being discussed.

Spring Shock White GTR Long 0.892 Blue (2)

This is the set of Traxxas Long GTR Shock Springs
with 0.892 Blue Compression Rate.

FEATURES:
Steel building and construction, white in color
Dab of paint on end of spring indicates compression rate

CONSISTS OF:
2 Long 0.892 Blue Rate GTR Shock Springs

SPECS:
Length: 1.8" (45mm)
Wire Diameter: 0.043" (1.1mm)

The below product likewise pairs actually well with the product being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Right here is a terrific product that many others have bought at the exact same time.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Assembly to automobile

SPECS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are used to support the Primary Clutch (one needed).