Traxxas Suspension Arms, Front/Rear (2)

These are the Front or Rear Suspension Arms
for the LaTrax Teton Monster Truck from Traxxas, TRAD76**.

FEATURES:
Composite plastic building and construction
Fastens to front or rear bulkheads

SUCHES AS:
Two Front or Rear Suspension Arms

Want an additional great item to compliment the above mentioned item?

Body Mounts (Posts), Front & Rear

These are the Front and Rear Body Mounts for the
LaTrax Teton Monster Truck from Traxxas.

FEATURES:
Plastic building and construction, black in color
Installs in shock towers and holds front and back of body in restaurant

SUCHES AS:
Front and Rear Body Mounts for the Teton Monster Truck

Here is a great item that lots of others have bought at the exact same time.

Camber Links (4)/ Toe Links (2)

These are the Camber Hyperlinks for the
LaTrax Teton Monster Truck from Traxxas.

FEATURES:
Plastic building and construction
Non-adjustable

SUCHES AS:
Four Camber Hyperlinks
Two Toe Hyperlinks

Here is a great item that lots of others have bought at the exact same time.

Bearings: 4X8mm (2), 6X10mm (8), 8X12mm (5)

This is the optional Ball Bearing Set for the
for the Latrax Rally Vehicle from Traxxas.

FEATURES:
Steel building and construction provides smoother operation and longer life than
    bushings
Replaces all bushings utilized in the center carriers, diff assembly,
    and driveshaft

SUCHES AS:
Two 4x8x3mm Ball Bearings
8 6x10x3mm Ball Bearings
5 8x12x3.5mm Ball Bearings

This item is often gotten with the above mentioned item.

Suspension Pin Set, Complete (Front & Rear) / Hardware

This is a set of Complete Suspension Pins
for the Traxxas Latrax Rally Vehicle, TRAD90**.

FEATURES:
Steel building and construction
Upper and lower pins for front and rear suspension

SUCHES AS:
8 Suspension Pins, 4 Screws

Here is a great item that lots of others have bought at the exact same time.



This is the Team Associated Factory Team Super 370 Motor.

FEATURES:
High performance Super 370 Motor with pre-installed leads.

INCLUDES:
One 370 motor with motor leads.

REQUIRES:
A Team Associated 18MT or RC18T

COMMENTS:
Replaces the stock 18MT motor. Can be utilized to transform an RC18T
    to an 18MT.

Several others have gotten this item in addition to the item that you are currently reading about.



This is the Traxxas Male Connector to Molex Female Connector Adapter.

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide area, gold-plated terminals
Reverse polarity protection makes it impossible to link in reverse
Textured surface for easy gripping
Suitable with high-current 12-gauge wire
Secure, favorable locking spring loaded terminals for constant
    contact
Several locking barbs keep terminals secure

SUCHES AS:
One Traxxas male port to Molex female port adapter

COMMENTS:
Molex port not ideal for high present usage

Several others have gotten this item in addition to the item that you are currently reading about.

Caster/Steering Blocks (2)

By Traxxas

FEATURES:
Made of black plastic

SUCHES AS:
Two caster centers (C-hubs)
Two steering blocks

SPECS:
caster centers, length: 28mm (1-1/8")
width: 14mm (1/2")
height: 16mm (5/8")
guiding blocks, length: 29mm (1-1/8")
width: 28mm (1-1/8")
height: 20mm (3/4")

Get this item to enhance the one you are reading about.

Driveshaft Assembly, Front Or Rear (2)

These are the Front or Rear Driveshaft Assemblies
for the LaTrax Teton Monster Truck from Traxxas, TRAD76**.

FEATURES:
Composite plastic building and construction
Transfers power from differentials to wheels

SUCHES AS:
Two Front or Rear Driveshaft Assemblies

COMMENTS:
For Center Driveshaft, order TRAC9806.