Traxxas Suspension Arm Set, Front (Inc

This is the Front Suspension Arm Set for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Upper Right Suspension Arm
One Lower Right Suspension Arm
One Upper Left Suspension Arm
One Upper Right Suspension Arm

NEEDS:
Installation on the automobile

The listed below product likewise pairs truly well with the product being reviewed.

Wing Mount/ Hardware (1/16 E-R

This is the Wing Mount for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Wing Mount
2 2.9x9.75mm Button Head Screws
2 2.9x7.95mm Button Head Screws
2 2.35x11.75mm Cap Head Screws
2 2.35x17.8mm Cap Head Screws

NEEDS:
Installation on the automobile

This is a superb enhancement to the product presently being reviewed.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building, black in color

CONSISTS OF:
One Wing
One Decal Set

NEEDS:
Installation on the automobile

SPECIFICATIONS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")

This product is frequently acquired with the above discussed product.

Pivot Balls (4)/ Pivot Ball Ca

These are the Pivot Balls and Pivot Ball Caps for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel built pivot balls
Black nylon pivot ball caps

CONSISTS OF:
4 Pivot Balls
4 Pivot Ball Caps

NEEDS:
Installation on the automobile's suspension

This product compliments the main item right here.

Steering Arm (Upper & Lower)/

This is the Steering Arm for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
2 Ball Studs
Front and Rear Shock Installs
4 2.5x18mm Cap Head Screws

NEEDS:
Installation on the automobile

Many others have actually acquired this product along with the product that you are presently reading about.

Suspension Pin Set (Front Or R

This is the Suspension Pin Set for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building
Silver in color

CONSISTS OF:
2 2x46mm Pins
4 2x14mm Pins

NEEDS:
Installation through suspension parts

Many others have actually acquired this product along with the product that you are presently reading about.

Toe Link, Front & Rear (Molded

These are the Front and Rear Toe Hyperlinks for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building
Red in color

CONSISTS OF:
4 Front/Rear Toe Hyperlinks
Eight Hollow Balls

NEEDS:
Installation on the automobile

SPECIFICATIONS:
Length: 86mm (3.4")
Diameter: 5mm (0.20")