Traxxas Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Steel building and construction
Silver in color

INCLUDES:
2 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

This item compliments the above discussed item.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FUNCTIONS:
Fastens to front skidplate and holds front diff in location
Gray in color, built of solidified plastic

INCLUDES:
Left and Right Front Bulkheads for the T-Maxx 3.3

NEEDS:
Attaching to skidplate and differential

REMARKS:
For the 3.3 version just.

This item compliments the main item below.

Shock Rebuild Big Bore/Ultra

This is a shock reconstruct package for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

You will enjoy this thing if you have the thing previously pointed out.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Helps to support axle providers and shocks
Black in color, built of solidified plastic

INCLUDES:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

NEEDS:
Attaching to chassis

REMARKS:
For the 3.3 version just. For the initial T-Maxx Lower Suspension
    Arms, order TRAC5132.

Right here is another item that compliments the item being discussed.

A-Arms, For Maxx, 2.5R & 3.3, Blue

These are the RPM Blue A-Arms for all versions of the Traxxas T-Maxx.
Optional Arms that replace the stock.

FEATURES:
Blue in color
Plastic building and construction

INCLUDES:
(1) Upper Arm
(1) Lower Arm
(2) RPM Decals

NEEDS:
Installation, NOTE-four plans are needed to replace all A-arms

SPECS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Density: 0.33" (8.4mm)

This is a fantastic addition to the item presently being discussed.

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Beast Truck.
This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930
and supplies protection to the front differential.

FEATURES:
Skidplate is built of high impact formed black plastic.
Front of skidplate kicks up at about 45 degrees to shield the
    differential from crash damage or tough landings from jumps.
Stainless steel installing plate supplies rigid installing surface.

INCLUDES:
One plastic front skidplate
One stainless steel installing plate.

REQUIRES:
Installing on chassis with 4 3x10mm countersunk maker screws
    (not included, use TRAC3277).

Right here is a wonderful item that several others have bought at the same time.

3 X 15Mm Counter Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel building and construction, Black in color
Utilized on the Traxxas Revo beast truck, can likewise be utilized in any
    application where a 3x15mm countersunk screw is needed

INCLUDES:
6 3x15mm Traxxas Countersunk Hex Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Size: 3mm

Get this item to enhance the one you are reading around.

Susp Arms (Upr) (2) Maxx

These are the Upper Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Fastens to bulkhead and helps to support axle providers
Black in color, built of solidified plastic

INCLUDES:
One Right and one Left Upper Suspension Arm for the T-Maxx 3.3

NEEDS:
Attaching to chassis

REMARKS:
For the 3.3 version just.