Traxxas Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Steel construction
Silver in color

INCLUDES:
Two 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

This product praises the above reviewed product.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FUNCTIONS:
Fastens to front skidplate and holds front diff in place
Gray in color, built of solidified plastic

INCLUDES:
Left and Right Front Bulkheads for the T-Maxx 3.3

REQUIRES:
Fastening to skidplate and differential

COMMENTS:
For the 3.3 variation only.

This product praises the main item below.

Shock Rebuild Big Bore/Ultra

This is a shock rebuild set for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

You will certainly like this item if you have the item just above mentioned.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Assists to support axle providers and shocks
Black in color, built of solidified plastic

INCLUDES:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

REQUIRES:
Fastening to chassis

COMMENTS:
For the 3.3 variation only. For the initial T-Maxx Lower Suspension
    Arms, order TRAC5132.

Here is an additional product that praises the product being reviewed.

A-Arms, For Maxx, 2.5R & 3.3, Blue

These are the RPM Blue A-Arms for all variations of the Traxxas T-Maxx.
Optional Arms that change the stock.

FEATURES:
Blue in color
Plastic construction

INCLUDES:
(1) Upper Arm
(1) Lower Arm
(2) RPM Decals

REQUIRES:
Setup, NOTE-four bundles are needed to change all A-arms

SPECIFICATIONS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Thickness: 0.33" (8.4mm)

This is a amazing enhancement to the product presently being reviewed.

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Beast Truck.
This skidplate bolts to the Chassis (crucial #4922) and the Bulkheads crucial #4930
and offers defense to the front differential.

FEATURES:
Skidplate is built of high impact molded black plastic.
Front of skidplate kicks up at about 45 degrees to protect the
    differential from crash damage or hard landings from jumps.
Stainless steel mounting plate offers rigid mounting surface.

INCLUDES:
One plastic front skidplate
One stainless steel mounting plate.

REQUIRES:
Setting up on chassis with 4 3x10mm countersunk maker screws
    (not included, use TRAC3277).

Here is a fantastic product that numerous others have bought at the very same time.

3 X 15Mm Counter Hex Screw (6)

This is a bundle of six 3x15mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel construction, Black in color
Utilized on the Traxxas Revo monster truck, can also be utilized in any
    application where a 3x15mm countersunk screw is needed

INCLUDES:
6 3x15mm Traxxas Countersunk Hex Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Diameter: 3mm

Get this product to boost the one you read around.

Susp Arms (Upr) (2) Maxx

These are the Upper Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Fastens to bulkhead and helps to support axle providers
Black in color, built of solidified plastic

INCLUDES:
One Right and one Left Upper Suspension Arm for the T-Maxx 3.3

REQUIRES:
Fastening to chassis

COMMENTS:
For the 3.3 variation only.