Traxxas Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Long lasting steel building

INCLUDES:
2 48mm pins
2 34mm pins
2 30mm pins
2 28mm pins
2 25mm pins

NEEDS:
Setup on the Rustler, Stampede or Bandit

COMMENTS:
For a complete suspension pin set order TRAC4940

Often acquired with the product that you are currently reading about.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building and construction

INCLUDES:
2 Blocks

NEEDS:
Traxxas Rustler or Stampede

Often acquired with the product that you are currently reading about.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

INCLUDES:
One left and right steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

You will certainly enjoy this product if you have the product just above discussed.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2 Front bearing (center) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if required use (2) DTXC1547.

Many others have actually acquired this product in addition to the product that you are currently reading about.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs install to the front A-arms and is exactly what the
steering knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and delegated insure proper setup

INCLUDES:
2 RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and steering knuckles

This is a wonderful enhancement to the product currently being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Many others have actually acquired this product in addition to the product that you are currently reading about.

Suspension Pins 44Mm Slash Rustler / Stampede / Bandit

This is a pair of chrome suspension pins used to hold the front suspension arms
on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER.

Includes: 2 chrome suspension pins and three "E" type retaining clips.

Requires:absolutely nothing parts are a direct replacement.

Specs:3mm x 44mm pins are notched for the 3MM "E" type retaining clips at each
end. WLG 9-29-97

Often acquired with the product that you are currently reading about.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FEATURES:
Fiberglass Building and construction

INCLUDES:
One Tie Bar

NEEDS:
Suspension Pins (TRAC4940)

SPECS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Thickness: 2.0 mm (0.082")

COMMENTS:
None

This product compliments the main item right here.

Front Axles (2) (R & S)

This is a Set of Stock Replacement Front Axles for the Rustler and Stampede.
These are located in the front steering blocks.

FEATURES:
Steel building
Natural color

INCLUDES:
2 front axles

NEEDS:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Size: 5mm

COMMENTS:
These will not work for the nitro variations. For that axle, use
    TRAC2536.