Traxxas Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Long lasting steel construction

CONSISTS OF:
Two 48mm pins
Two 34mm pins
Two 30mm pins
Two 28mm pins
Two 25mm pins

NEEDS:
Installation on the Rustler, Stampede or Outlaw

REMARKS:
For a total suspension pin set order TRAC4940

Often gotten with the thing that you are currently reviewing.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building

CONSISTS OF:
Two Blocks

NEEDS:
Traxxas Rustler or Stampede

Often gotten with the thing that you are currently reviewing.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

CONSISTS OF:
One left and right steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

You will certainly like this thing if you have the thing earlier pointed out.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

CONSISTS OF:
Two Front bearing (center) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

Numerous others have actually gotten this thing together with the thing that you are currently reviewing.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs install to the front A-arms and is exactly what the
steering knuckles attach to.

FEATURES:
Nylon construction, black in color
Stamped right and left to guarantee proper setup

CONSISTS OF:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and steering knuckles

This is a fantastic enhancement to the thing currently being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Numerous others have actually gotten this thing together with the thing that you are currently reviewing.

Suspension Pins 44Mm Slash Rustler / Stampede / Bandit

This is a set of chrome suspension pins used to hold the front suspension arms
on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER.

Includes: two chrome suspension pins and 3 "E" type retaining clips.

Requires:nothing parts are a direct replacement.

Specs:3mm x 44mm pins are notched for the 3MM "E" type retaining clips at each
end. WLG 9-29-97

Often gotten with the thing that you are currently reviewing.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FEATURES:
Fiberglass Building

CONSISTS OF:
One Tie Bar

NEEDS:
Suspension Pins (TRAC4940)

SPECS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Thickness: 2.0 mm (0.082")

REMARKS:
None

This thing compliments the main item right here.

Front Axles (2) (R & S)

This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.
These lie in the front steering blocks.

FEATURES:
Steel construction
Natural color

CONSISTS OF:
Two front axles

NEEDS:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Size: 5mm

REMARKS:
These will not work for the nitro variations. For that axle, usage
    TRAC2536.