Traxxas Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel building and construction

CONSISTS OF:
Two 48mm pins
Two 34mm pins
Two 30mm pins
Two 28mm pins
Two 25mm pins

REQUIRES:
Setup on the Rustler, Stampede or Bandit

COMMENTS:
For a complete suspension pin set order TRAC4940

Often purchased with the thing that you are currently checking out.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Construction

CONSISTS OF:
Two Blocks

REQUIRES:
Traxxas Rustler or Stampede

Often purchased with the thing that you are currently checking out.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building and construction
Black in color

CONSISTS OF:
One left and ideal steering blocks

REQUIRES:
5x11x4mm bearings (DTXC1547)

You will certainly enjoy this product if you have the product above pointed out.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Front bearing (hub) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

Many others have actually purchased this thing in addition to the thing that you are currently checking out.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks install to the front A-arms and is exactly what the
guiding knuckles attach to.

FEATURES:
Nylon building and construction, black in color
Stamped right and delegated insure correct installation

CONSISTS OF:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly in between A-arms and guiding knuckles

This is a wonderful addition to the thing currently being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Many others have actually purchased this thing in addition to the thing that you are currently checking out.

Suspension Pins 44Mm Slash Rustler / Stampede / Bandit

This is a set of chrome suspension pins used to hold the front suspension arms
on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER.

Includes: 2 chrome suspension pins and 3 "E" type retaining clips.

Requires:absolutely nothing parts are a direct replacement.

Specs:3mm x 44mm pins are notched for the 3MM "E" type retaining clips at each
end. WLG 9-29-97

Often purchased with the thing that you are currently checking out.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FUNCTIONS:
Fiberglass Construction

CONSISTS OF:
One Tie Bar

REQUIRES:
Suspension Pins (TRAC4940)

SPECS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Density: 2.0 mm (0.082")

COMMENTS:
None

This thing compliments the main item below.

Front Axles (2) (R & S)

This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.
These are located in the front steering blocks.

FEATURES:
Steel building and construction
Natural color

CONSISTS OF:
Two front axles

REQUIRES:
Nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Diameter: 5mm

COMMENTS:
These will not work for the nitro versions. For that axle, usage
    TRAC2536.