Traxxas Susp Arms (Upr) (2) Maxx

These are the Upper Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Fastens to bulkhead and helps to support axle carriers
Black in color, built of solidified plastic

INCLUDES:
One Right and one Left Upper Suspension Arm for the T-Maxx 3.3

REQUIRES:
Securing to chassis

COMMENTS:
For the 3.3 variation just.

Want an additional terrific item to compliment the above mentioned item?

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Helps to support axle carriers and shocks
Black in color, built of solidified plastic

INCLUDES:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

REQUIRES:
Securing to chassis

COMMENTS:
For the 3.3 variation just. For the initial T-Maxx Lower Suspension
    Arms, order TRAC5132.

Right here is an additional item that praises the item being reviewed.

Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Steel building
Silver in color

INCLUDES:
2 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

Right here is an additional item that praises the item being reviewed.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

INCLUDES:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Guideline sheet

REQUIRES:
2 plans needed to complete truck

This item is regularly gotten with the above mentioned item.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building
Natural refined color

INCLUDES:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

Right here is a terrific item that numerous others have actually bought at the same time.

Pivot Balls W/Cap

These are the Pivot Balls and Pivot Ball Cap Bushings for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.
Two of these pivot balls fit into the axle carriers at each wheel
    The pivot ball cap bushings fit in between the pivot balls
and the aluminum caps.

FEATURES:
Replaces stock pivot balls and pivot ball cap bushings.
Pivot balls are made of steel, pivot ball cap bushings are made of
    plastic.

INCLUDES:
4 pivot balls.
Four pivot ball cap bushings

REQUIRES:
Threading the pivot balls through the axle carriers and into the
    suspension arms. Placing pivot ball cap bushings in between the pivot
    balls and aluminum caps.

The listed below item also sets actually well with the item being reviewed.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock including the shock oil.

FEATURES:
Nylon building

INCLUDES:
2 nylon shock cap (tops)
2 nylon shock cap (bottoms)

REQUIRES:
Other shock elements

SPECIFICATIONS:
Diameter Tops Bottoms
16MM 13MM

COMMENTS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

Right here is a terrific item that numerous others have actually bought at the same time.

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
usage on the Traxxas Revo series.

FEATURES:
Nylon Construction
Black in Color
Enables Oversized Bearing utilize

INCLUDES:
One Left Axle Provider
One Right Axle Provider
4 Dust Boot Retainers
2 Bearing Spacers

REQUIRES:
Setup