Traxxas Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Helps to support axle carriers and shocks
Black in color, constructed of hardened plastic

INCLUDES:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

NEEDS:
Fastening to chassis

COMMENTS:
For the 3.3 version just. For the original T-Maxx Lower Suspension
    Arms, order TRAC5132.

Right here is a fantastic item that numerous others have actually bought at the exact same time.

Susp Arms (Upr) (2) Maxx

These are the Upper Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Fastens to bulkhead and assists to support axle carriers
Black in color, constructed of hardened plastic

INCLUDES:
One Right and one Left Upper Suspension Arm for the T-Maxx 3.3

NEEDS:
Fastening to chassis

COMMENTS:
For the 3.3 version just.

You will certainly enjoy this item if you have the item previously mentioned.

Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Steel construction
Silver in color

INCLUDES:
Two 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

This item is regularly gotten with the above mentioned item.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

INCLUDES:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Direction sheet

NEEDS:
Two plans needed to complete truck

Want another fantastic item to compliment the above mentioned item?

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FUNCTIONS:
Fastens to front skidplate and holds front diff in location
Gray in color, constructed of hardened plastic

INCLUDES:
Left and Right Front Bulkheads for the T-Maxx 3.3

NEEDS:
Fastening to skidplate and differential

COMMENTS:
For the 3.3 version just.

This item praises the above talked about item.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock consisting of the shock oil.

FEATURES:
Nylon construction

INCLUDES:
Two nylon shock cap (tops)
Two nylon shock cap (bottoms)

NEEDS:
Other shock parts

SPECIFICATIONS:
Size Tops Bottoms
16MM 13MM

COMMENTS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

Right here is a fantastic item that numerous others have actually bought at the exact same time.

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
use on the Traxxas Revo series.

FEATURES:
Nylon Construction
Black in Color
Allows for Oversized Bearing utilize

INCLUDES:
One Left Axle Carrier
One Right Axle Carrier
Four Dust Boot Retainers
Two Bearing Spacers

NEEDS:
Installation

Want another fantastic item to compliment the above mentioned item?

Pivot Balls W/Cap

These are the Pivot Balls and Pivot Ball Cap Bushings for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.
Two of these pivot balls fit into the axle carriers at each wheel
    The pivot ball cap bushings fit in between the pivot balls
and the aluminum caps.

FEATURES:
Changes stock pivot balls and pivot ball cap bushings.
Pivot balls are made from steel, pivot ball cap bushings are made from
    plastic.

INCLUDES:
Four pivot balls.
Four pivot ball cap bushings

NEEDS:
Threading the pivot balls through the axle carriers and into the
    suspension arms. Putting pivot ball cap bushings in between the pivot
    balls and aluminum caps.