Traxxas Stub Axles Rear (2)

These are the Rear Stub Axles
for the Traxxas Outlaw, Stampede and Rustler.

FEATURES:
Metal building and construction, black and silver in color

INCLUDES:
Two rear stub axles and pins

SPECIFICATIONS:
Length: 1.65" (42mm)
Size: .51" (13mm) at biggest point

Below is another product that praises the product being talked about.

Half Shafts Long Truck (2)

This is a set of telescoping drive shafts for the Blue Eagle LS II.

Includes: 2 white nylon telescoping shaft (each shaft is made from 2 pieces)
4 aluminum U-joints

pcd 01/23/94

Below is another product that praises the product being talked about.

Half Shafts Long Truck (6)

This is a set of the Traxxas telescoping drive shafts (equivalent of dogbones
or swing shafts). These are for usage on Traxxas trucks.

Features: White plastic parts

Includes:
(6) sets of drive shafts (each set consists of an inside shaft wich
slides in the outdoors shaft).

Measurements: 2.5" long when totally compressed.

Requires: Nothing else required

This product is regularly gotten with the above pointed out product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Below is a excellent product that lots of others have actually purchased the same time.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is what the
guiding knuckles connect to.

FEATURES:
Nylon building and construction, black in color
Stamped right and delegated insure appropriate installation

INCLUDES:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly in between A-arms and guiding knuckles

The listed below product additionally pairs actually well with the product being talked about.



This is the ST Racing Silver Aluminum Back Center Provider
for the Traxxas Slash 2WD, Stampede, Rustler and Bandit.

FEATURES:
Silver in color

INCLUDES:
One Silver Aluminum Back Center Provider

Below is a excellent product that lots of others have actually purchased the same time.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock including the shock oil.

FEATURES:
Nylon building and construction

INCLUDES:
Two nylon shock cap (tops)
Two nylon shock cap (bottoms)

NEEDS:
Other shock elements

SPECIFICATIONS:
Size Tops Bottoms
16MM 13MM

COMMENTS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

Numerous others have actually gotten this product together with the product that you are currently checking out.

Stub Axle Carriers (2) (R & S)

This is the Traxxas #3652 Stub Axle Provider that comes included with
the Rustler and Stampede trucks.

FEATURES:
Made from a black plastic/nylon material.
Also called the rear center or center carrier.
Has 2 possible mount areas for the external hinge pin shaft.

INCLUDES.
2 Stub alxe carriers.

COMMENTS:
This holds the 2 5x8mm bushings (or bearings) on the stub
axle likewise called the wheel shaft.

AXY
3/25/95

Below is a excellent product that lots of others have actually purchased the same time.

Diff Output Yokes Bk (2) W/3X5mm Cntrsnk Screws (2 ) &

These are the Differential Output Yokes
for the Traxxas Outlaw, Stampede and Rustler VXL.

FEATURES:
Black plastic building and construction

INCLUDES:
Two differntial output yokes
Two 3x5mm countersunk screws
Two screw pins

NEEDS:
Installation

SPECIFICATIONS:
Length: .70" (18mm)
Size: .51" (13mm)