Traxxas Stub Axle Carriers (2) Rqrs 5X11x4mm Bb

This is a set of Stub Axle Carriers
for the Traxxas Outlaw, Stampede and Rustler VXL.

FEATURES:
Molded nylon building (black)

CONSISTS OF:
2 stub axle providers

NEEDS:
Setup on the car

Regularly bought with the product that you are presently reading about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

The listed below product likewise sets truly well with the product being discussed.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

CONSISTS OF:
One left and right steering blocks

NEEDS:
5x11x4mm bearings (DTXC1547)

Want another wonderful product to enhance the above stated product?

Front Axles (2) (R & S)

This is a Set of Stock Replacement Front Axles for the Rustler and Stampede.
These lie in the front steering blocks.

FEATURES:
Steel building
Natural color

CONSISTS OF:
2 front axles

NEEDS:
Nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Diameter: 5mm

REMARKS:
These will not work for the nitro variations. For that axle, use
    TRAC2536.

Right here is another product that compliments the product being discussed.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on car

Right here is another product that compliments the product being discussed.



This is the Traxxas Male Adapter to Molex Female Adapter Adapter.

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it impossible to connect in reverse
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Protect, positive locking spring crammed terminals for consistent
    contact
Several locking barbs keep terminals secure

CONSISTS OF:
One Traxxas male adapter to Molex female connector adapter

REMARKS:
Molex adapter not appropriate for high current use

This product is regularly bought with the above stated product.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building
Natural polished color

CONSISTS OF:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

Right here is a wonderful product that lots of others have bought at the exact same time.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

The listed below product likewise sets truly well with the product being discussed.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
2 61mm (96mm center to center) turnbuckles

NEEDS:
Setup on the car

Right here is a wonderful product that lots of others have bought at the exact same time.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Thickness: 0.5mm