Traxxas Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, black and silver in color

CONSISTS OF:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

Numerous others have actually purchased this product along with the product that you are presently reading about.

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 rear 49mm (82mm center to center) turnbuckles

REQUIRES:
Setup on the automobile

Right here is a excellent product that lots of others have actually bought at the same time.

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Hyperlinks
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends
Can be Utilized on Front or Rear

CONSISTS OF:
2 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

REQUIRES:
Assembly onto Vehicle

Want an additional excellent product to compliment the above mentioned product?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Right here is an additional product that compliments the product being talked about.

ProTrac Susp Kit Fr Arms Slash

This is an optional Pro-Line ProTrac Suspension Set Front Arms
for use on the 1/10 scale 2WD Traxxas Slash.
**Will not deal with the 4x4 Slash.**

FEAUTRES:
Nylon building, black in color
Boosts forward acceleration, corner speed, consistency and
    drivability

CONSISTS OF:
2 front arms
One Proline decal

REQUIRES:
Setup onto automobile

Want an additional excellent product to compliment the above mentioned product?

Servo Horns, Steering, Steerin

    This is the Steering Servo Horns for the Traxxas E-Maxx.

FUNCTIONS:
Plastic servo horn building
Steering rods come with rod ends installed

CONSISTS OF:
2 steering servo horns
1 3x12mm threaded rod steering link with rod ends and hollow balls

REQUIRES:
Setup on the E-Maxx

You will like this product if you have the product above stated.

ProTrac Susp Kit Re Arms Slash

This is an optional Pro-Line ProTrac Suspension Set Rear Arms
for use on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon building, black in color
Boosts forward acceleration, corner speed, consistency and
    drivability

CONSISTS OF:
2 rear arms
One Proline decal

REQUIRES:
Setup onto automobile