Traxxas Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

CONSISTS OF:
One left and right steering obstructs

REQUIRES:
5x11x4mm bearings (DTXC1547)

This product is often bought with the above mentioned product.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Construction

CONSISTS OF:
Two Blocks

REQUIRES:
Traxxas Rustler or Stampede

Want an additional terrific product to compliment the above mentioned product?

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made from stainless steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electric
(not Nitro) Rustler
Likewise called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

This is a superb addition to the product currently being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Want an additional terrific product to compliment the above mentioned product?

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Long lasting steel building

CONSISTS OF:
Two 48mm pins
Two 34mm pins
Two 30mm pins
Two 28mm pins
Two 25mm pins

REQUIRES:
Setup on the Rustler, Stampede or Bandit

COMMENTS:
For a total suspension pin set order TRAC4940

This product compliments the main item right here.

Stub Axle Carriers (2) Rqrs 5X11x4mm Bb

This is a pair of Stub Axle Carriers
for the Traxxas Bandit, Stampede and Rustler VXL.

FEATURES:
Molded nylon building (black)

CONSISTS OF:
Two stub axle providers

REQUIRES:
Setup on the automobile

This product compliments the above gone over product.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and connectors

CONSISTS OF:
Traxxas Titan 550 Motor, two capacitors and two leads with connectors

REQUIRES:
Installing in automobile

SPECS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not provided

This is a superb addition to the product currently being gone over.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be utilized on Traxxas or most other brand names of cars.

FEATURES:
Metal clips are silver in color

CONSISTS OF:
Twelve body clips

SPECS:
Length: aprrox. 7/8"

Often bought with the product that you are currently checking out.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Height: 2 3/4"
Density: 1/4"
Width at base: 2 3/4"
Width at top: 2"

CONSISTS OF:
(1) Front shock tower for the Traxxas Stampede