Traxxas Steering Blocks, Left & Right

These are the Steering Blocks for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building and construction
Black in color

INCLUDES:
2 steering blocks

NEEDS:
Installation on guiding assembly

SPECS:
Length: 35mm (1.38")
Width: 32mm (1.26")

You will certainly like this item if you have the item previously stated.

Caster Blocks (C-Hubs), Left &

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building and construction
Black in color

INCLUDES:
One left caster block
One right caster block

NEEDS:
Installation on Slash

SPECS:
Length: 49mm (1.93")
Width: 29.5mm (1.16")

Get this product to boost the one you are reading about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Want an additional excellent product to compliment the above pointed out product?

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

INCLUDES:
2 Ball Bearings

NEEDS:
Assembly to automobile

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are utilized to support the Main Clutch (one needed).

Often purchased with the product that you are currently checking out.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building and construction

INCLUDES:
Front driveshaft assembly
Screw pin

NEEDS:
Installation on automobile

Below is an additional product that praises the product being reviewed.

Stub Axle Housing (2)

These are the axle housings (or center providers) utilized on the: Rad 2, Hawk 2,
Eagle, Blue Eagle LS II and Nitro Rustler. The housings are formed of
black nylon.

Includes: 2 axle housings

pcd 01/23/94

Below is a excellent product that several others have purchased the same time.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building and construction

INCLUDES:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on automobile

The below product likewise pairs really well with the product being reviewed.

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas cars
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building and construction

INCLUDES:
2 hex centers
Four axle pins

NEEDS:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These centers could be utilized with other cars using the same
    pin/hex design. These centers Will Not deal with the T-Maxx or E-Maxx.

This product is frequently purchased with the above pointed out product.

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
2 rear 49mm (82mm center to center) turnbuckles

NEEDS:
Installation on the automobile

This product is frequently purchased with the above pointed out product.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
2 front 39mm (69mm center to center) turnbuckles and guideline
    sheet

NEEDS:
Installation on the automobile