Traxxas Steering Bellcranks/Servo Saver, Spring, Horn, Retainer

This is the Steering Bellcrank Set for the Traxxas Slash 4X4.

FEATURES:
Composite nylon building
Changes a used or damaged bellcrank set
May also be installed on the Traxxas Rustler, Outlaw and 2WD Slash
    models (assembled in various setups depending on model)

INCLUDES:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring
One Spring Retainer
2 Servo Arms
2 Shoulder Screws
2 3x15 Counter Sunk Machine Screws
2 Hollow Balls
4 Bushings
Instruction Sheet

NEEDS:
Assembly and installation following the model handbook and consisted of
direction sheet

Here is a terrific item that several others have bought at the exact same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This item is regularly gotten with the above discussed item.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body installs allow a wide variety of bodies
    to be utilized consisting of rally car bodies
Constructed of nylon, black in color
Screw-on body install system removes metal clips

INCLUDES:
Front and Rear Body Mounts and Publishes with Mounting Hardware

The below item also pairs truly well with the item being reviewed.

Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a budget plan friendly waterproof digital servo with fantastic torque for lots of applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge innovation with super high 12-bit (4096) resolution and metal equipments for your greater accuracy when evading puddles. This is a great upgrade if your planning to drive your RC car in any condition...rain, sleet, or snow.

Functions:

• Combines cutting edge
  innovation with super high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Exceptionally strong metal equipments ensure long-life and durability.
• Our servos are completely green ? from products to production, these servos are ecologically friendly.
• Ideal for RC cars, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Score: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

This item is regularly gotten with the above discussed item.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Kit for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Decreases the chassis 1" (25.4mm) for better handling and greater
    cornering speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
2 Nerf Bars
Battery Hold Down with Front and Rear Retainers
2 Front Shock Springs
Hardware and Guidelines

This item is regularly gotten with the above discussed item.

Nerf Bars, For Traxxas Lcg Slash 2Wd, Blue

These are the optional RPM Nerf Bars in Blue for the 2WD Traxxas LCG Slash.

FEATURES:
Engineering grade nylon building
Changes the Traxxas #5833, #5833A & #5833G nerf bars
Designed particularly for the low center of mass (LCG) Slash
    chassis
Additional cross bracing to optimize rigidness while taking in effect
    energy

INCLUDES:
Left and Right Nerf Bars in Blue