Traxxas Steering Bellcranks/Servo Saver, Spring, Horn, Retainer

This is the Steering Bellcrank Set for the Traxxas Slash 4X4.

FUNCTIONS:
Composite nylon construction
Changes a used or broken bellcrank set
May also be installed on the Traxxas Rustler, Outlaw and 2WD Slash
    designs (assembled in various setups depending on model)

INCLUDES:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring
One Spring Retainer
2 Servo Arms
2 Shoulder Screws
2 3x15 Counter Sunk Maker Screws
2 Hollow Balls
Four Bushings
Guideline Sheet

NEEDS:
Assembly and installation following the model handbook and consisted of
guideline sheet

Below is a wonderful product that numerous others have actually purchased the exact same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This product is frequently gotten with the above discussed product.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body installs enable a variety of bodies
    to be utilized consisting of rally car bodies
Constructed of nylon, black in color
Screw-on body mount system removes metal clips

INCLUDES:
Front and Rear Body Mounts and Posts with Installing Hardware

The listed below product also pairs actually well with the product being reviewed.

Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a budget plan friendly water resistant digital servo with fantastic torque for lots of applications. This brushed servo features a speed of .17 and 208.0 oz-in of torque 6.0V. It integrates leading edge innovation with very high 12-bit (4096) resolution and metal equipments for your higher accuracy when dodging puddles. This is a fantastic upgrade if your seeking to drive your RC car in any condition...rain, sleet, or snow.

Functions:

• Combines leading edge
  innovation with very high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Exceptionally strong metal equipments guarantee long-life and durability.
• Our servos are totally green ? from products to production, these servos are ecologically friendly.
• Ideal for RC vehicles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Equipment: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Rating: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

This product is frequently gotten with the above discussed product.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Set for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Reduces the chassis 1" (25.4mm) for much better handling and higher
    catching speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
2 Nerf Bars
Battery Hold Down with Front and Rear Retainers
2 Front Shock Springs
Hardware and Instructions

This product is frequently gotten with the above discussed product.

Nerf Bars, For Traxxas Lcg Slash 2Wd, Blue

These are the optional RPM Nerf Bars in Blue for the 2WD Traxxas LCG Slash.

FEATURES:
Engineering grade nylon construction
Changes the Traxxas #5833, #5833A & #5833G nerf bars
Developed particularly for the low center of mass (LCG) Slash
    chassis
Extra cross bracing to enhance rigidness while taking in impact
    energy

INCLUDES:
Left and Right Nerf Bars in Blue