Traxxas Steering Bellcranks (R & L)

    These are Steering Bellcranks and Draglinks for the
Traxxas Rustler and Stampede.

FEATURES:
White Plastic Building and construction

CONSISTS OF:
One Bellcrank
One Link
One Arm

NEEDS:
Rustler or Stampede

Frequently purchased with the item that you are presently checking out.

Steerng Bellcrnk Screws (R)

These are Replacement Steering Hardware from Traxxas.

FEATURES:
Metal construction.
Chrome draglink shoulder screws with a phillips drive.
Black guiding bellcrank shoulder screws with a hexagon socket drive.
Coarse thread.

INCLUDES:
(2) Bellcrank Screws
(2) Draglink Screws

SPECS:
Bellcrank Size: 3x30mm
Draglink Size: 3x5mm

This is a superb enhancement to the item presently being gone over.

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.
The front suspension arm hinge pins pass through this piece.

FEATURES:
Gray nylon construction

CONSISTS OF:
One front bulkhead

NEEDS:
Nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

COMMENTS:
This part is used on the list below automobiles:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.

Here is another item that compliments the item being gone over.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FEATURES:
Fiberglass Building and construction

CONSISTS OF:
One Tie Bar

NEEDS:
Suspension Pins (TRAC4940)

SPECS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Density: 2.0 mm (0.082")

COMMENTS:
None

This item compliments the main item below.

Servo Saver Large

This is the replacement servo saver for the following Traxxas sets:
Rustler and Stampede. The servo saver is spring packed and has adaptors for
both Futaba and Airtronics servos.

Features: White plastic construction
Spring loaded
2 adaptors-Futaba and Airtronics

Here is a terrific item that numerous others have actually bought at the very same time.



This is a pack of 10 optional universal body clips from Racers Edge.

This item is frequently purchased with the above stated item.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on automobile

The below item likewise sets actually well with the item being gone over.

Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are constructed of chrome-plated steel and used to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
2 3mm x 46mm screw pins
2 3mm x 40mm screw pins
2 3mm x 29mm screw pins
2 2mm x 27mm screw pins
2 2mm x 24mm screw pins