Traxxas Steering Bellcranks E/T Maxx

    This is a Pair of the Steering Bellcranks for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Beast Trucks.
These bellcranks bolt to the chassis and the bellcrank posts connect
to the guiding turnbuckles.

FEATURES:
Replaces stock guiding bellcranks.
All elements are plastic, except for the shoulder screws which are
    steel.

INCLUDES:
2 guiding bellcranks
Four 5x8x2.5mm bellcrank bushings.
Two bellcrank post spacers.
Two 3x8mm shoulder screws.
One drag link.

REQUIRES:
Connecting bellcranks to the chassis and connecting drag link to the
    guiding turnbuckles.

Lots of others have gotten this thing in addition to the thing that you are presently reviewing.

Skidplate Frt Grey

This is the Front Plastic Skidplate for the T-Maxx 3.3.

FEATURES:
Attaches to and safeguards chassis and supports the front bulkhead
Skidplate is gray in color

INCLUDES:
Skidplate and stainless steel plate

REQUIRES:
Installing on chassis with four 3x12mm countersunk machine screws
    (not consisted of, use TRAC2552

COMMENTS:
For the 3.3 version just. For the initial T-Maxx Skidplate, order
    TRAC4037.

This is a wonderful addition to the thing presently being discussed.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Long lasting steel construction

INCLUDES:
Eight pins

REQUIRES:
Assembly onto T/E-Maxx

SPECS:
Length: 65.3mm (2.57")
Diameter: 3.2mm (.13")

COMMENTS:
These suffice hinge pins for the whole vehicle.

Here is one more thing that compliments the thing being discussed.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Blue

These are the RPM Front Bulkheads in Blue
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend construction, blue in color
Locknuts utilized at the chassis and skid plate installing holes to
    securely lock bulkheads in place, decreasing the chance of breakage

INCLUDES:
One each Left and Right Front Bulkhead
Eight M3 Locknuts
Four M3 x 20mm Flathead Screws
Four M3 x 22mm Flathead Screws