Traxxas Steering Arm (Upper & Lower)/

This is the Steering Arm for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
Two Ball Studs
Front and Rear Shock Installs
Four 2.5x18mm Cap Head Screws

REQUIRES:
Installation on the vehicle

Below is a fantastic product that lots of others have bought at the very same time.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for usage on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
Two front bulkhead halves
Four 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

REQUIRES:
Installation over front diff assembly

This product praises the above talked about product.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
One Front Skidplate
One Rear Skidplate
One Transmission Skid Plate
Two Steering Servo Guards
One Steering Servo Cover Plate

REQUIRES:
Installation on the vehicle

Want an additional fantastic product to match the above mentioned product?

Chassis, 1/16 E-Revo/Slash

This is the Chassis for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Grey in color

SUCHES AS:
One Chassis

REQUIRES:
Installation on vehicle

SPECS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

This product praises the above talked about product.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Posts for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

SUCHES AS:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

REQUIRES:
Installation on the vehicle

Below is a fantastic product that lots of others have bought at the very same time.

Suspension Pin Set (Front Or R

This is the Suspension Pin Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel construction
Silver in color

SUCHES AS:
Two 2x46mm Pins
Four 2x14mm Pins

REQUIRES:
Installation through suspension elements

Get this product to boost the one you are reading about.

Servo, Micro, Waterproof

This is the Water resistant Micro Servo for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Water resistant
Blue nylon case

SUCHES AS:
One Water resistant Micro Servo with basic connector

REQUIRES:
Installation on the vehicle

SPECS:
Length: 29.5mm (1.2")
Width: 14mm (0.55")
Height: 29mm (1.1")

This product is often acquired with the above mentioned product.

Waterproof Micro Digital Servo 0.11Sec / 69Oz @ 6V

WATERPROOF DIGITAL MICRO SERVO .11/69@6V PERFECT FOR TRAXXAS 1/16

Want an additional fantastic product to match the above mentioned product?



This is the Parallel Battery Connection Wire Harness for usage
on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Traxxas High Power Connectors
Integrates mAh of connected batteries for longer run time

SUCHES AS:
One Wire Harness (2 Traxxas Male connectors and one Traxxas female
    connector)
User's manual

REQUIRES:
Installation in between batteries and ESC

This is a fantastic addition to the product presently being talked about.

Tq Receiver, Micro, 2.4Ghz 3 Channel

This is the TQ 2.4GHz 3-Channel Micro Receiver
for usage with the Traxxas TQ 2.4GHz Transmitter.

FEATURES:
Suitable with the Traxxas 3-channel #6517 transmitter and the
    older 2-ch #2238 TQ 2.4GHz transmitter

SUCHES AS:
TQ 2.4GHz 3-Channel Micro Receiver

SPECS:
Dimensions: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm)
Weight: 0.35oz (10g)