Traxxas Ez Start Quick Connector

This is the stock replacement Quick Port set for the Traxxas EZ Start.

FEATURES:
All wires included in an EZ starting system

INCLUDES:
One total Wire Set with ports
2 zip ties
One adhesive foam pad

NEEDS:
The rest of the EZ Beginning system.

COMMENTS:
This does not consist of the connector and box which attaches to the
    7.2V battery pack for usage on the EZ starting system. (TRAP4580)

Lots of others have bought this item along with the item that you are currently reading about.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Duty Long Glowplug.

FEATURES:
Suitable for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Matched for the diverse throttle variety of off-road racing
Medium heat variety

INCLUDES:
One Traxxas Medium Heat Variety Super Duty Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro content

This is a great enhancement to the item currently being gone over.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building
Blue and Black in Color

INCLUDES:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Direction sheet

NEEDS:
2 packages had to complete truck

You will enjoy this item if you have the item previously mentioned.

Body Mount Posts

This is the Front Body Mount Posts, Back Body Mount and 4 Screw Pins
for the Traxxas T-Maxx 3.3R.

FEATURES:
Constructed of plastic these posts and install connect the body to the
    chassis

INCLUDES:
2 Front Body Mount Posts Back Body Mount and 4 2.5 x 17mm screw
    pins

NEEDS:
Installing on chassis

Right here is an additional item that compliments the item being gone over.

Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls use in the LS II race truck kit.

Kit consists of: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

This item compliments the above gone over item.

Stub Axle Carriers (2) Rqrs 5X11x4mm Bb

This is a pair of Stub Axle Carriers
for the Traxxas Outlaw, Stampede and Rustler VXL.

FEATURES:
Molded nylon building and construction (black)

INCLUDES:
2 stub axle carriers

NEEDS:
Installation on the automobile

Lots of others have bought this item along with the item that you are currently reading about.

Flywheel

This is the aluminum 2-pin flywheel utilized on the Traxxas Stampede truck.

INCLUDES:
(1) Aluminum 2-pin flywheel

SPECIFICATIONS:
diameter - 32mm
width - 6mm JAL 12/5/96

Likewise fits the Nitro Sport. updateaxy2/21/98

Right here is an additional item that compliments the item being gone over.

3 X 10 Mm Cst Screws (6)

These are 3x10mm Countersunk Self-Tapping Screws from Traxxas.

FEATURES:
Steel building and construction
Phillips drive insert
Countersunk and self-tapping
Replacement parts developed for the Traxxas Nitro Hawk

INCLUDES:
(6) Screws

SPECIFICATIONS:
Diameter: 3mm
Length: 10mm

This item compliments the main item right here.

3 X 10 Mm Csm Screws (6)

This is a set of 3x10mm Countersunk machine screws for the Traxxas Nitro Hawk.

FEATURES:
Metal building and construction
Countersunk (flat head) machine screws
Phillips drive insert
Replacement parts developed for the Traxxas Nitro Hawk

INCLUDES:
Six Screws

SPECIFICATIONS:
Length: 10mm
Diameter: 3mm