Traxxas Ez-Start 2 Complete System

This is the EZ Start 2(R) Starting System from Traxxas.

This is the updated replacement for the first-generation EZ Start 2 System.
It features a higher torque motor for the new 3.3 race series engines.

FEATURES:
Simple push-button beginning for radiance plug and starter motor.
LED status for both radiance plug and starter motor
All-in-one Hand-held starter/battery holder
Hand-held starter features easy plug-in connection
Hand-held starter features an incorporated belt-clip for portability

CONSISTS OF:
One Hand-held starter/battery holder
One wire harness with plug-in port
One gear decrease unit with attached starter motor
Three 3x12mm button-head screws featuring a hex-drive

REQUIRES:
7.2 volt 6-cell battery with Tamiya port, can utilize DTXC2010

SPECS:
Beginner Motor Size: 380 size High Torque motor
Hand-held starter length: 6.375" (162mm)
Hand-held starter width: 2" (51mm)

Lots of others have actually gotten this thing in addition to the thing that you are presently reading about.

Anaconda Tire W/All-Star Bk Chrome Nitro Rr/Elec F R 1 Lef

This is a pair of the Traxxas Nitro Rear/Electric Front
All Star Wheels and Anaconda Tires.

FEATURES:
Black chrome plated plastic, five spoke design
Split X-Pattern tread tires with foam inserts

CONSISTS OF:
One left and one right all-star wheels with anaconda tires and
    foam inserts for nitro rear/electric front automobiles

REQUIRES:
Installing on car

SPECS:
Size: 3.93" (100mm)
Width: 1.96" (50mm)

Here is an additional thing that praises the thing being gone over.

Tail Rotor (1): 120SR




Here is a great thing that several others have actually bought at the very same time.



This is the DuraTrax NiMH 7.2V 3000mAh Onyx Stick Battery Pack
with Requirement Connector.

FEATURES:
Perfect sport pack for cars, trucks and boats

CONSISTS OF:
DuraTrax NiMH 7.2V 3000mAh Onyx Stick Battery with Standard
    Connector

REQUIRES:
NiMH compatible charger such as the Duratrax Onyx series

SPECS:
Capacity: 3000mAh
Number of Cells in Series: 6
Ranked Voltage: 7.2V
Min. Discharge Voltage: 5.4V
Maximum Recommended Charge Current: 4 amps
Discharge Lead: 14AWG 2.7" (70mm) long wire w/Standard port
Pack Measurements: 5.2 x 1.9 x 0.9" (131 x 47 x 24mm)
Weight: 13 oz (360 g)
Number of Welds per Connection: 6 spot welds
Cell Size: Sub-C

This thing praises the above gone over thing.

Ac To Dc Adapter

This is the Traxxas Air Conditioner to DC Power Supply Adapter.

FEATURES:
Created specifically for usage with the Traxxas peak spotting DC
    2-4A fast chargers and enables them to be powered from a basic
    110V Air Conditioner outlet
No on/off switch, plug in to switch on and unplug to switch off, unplug
    when not in usage

CONSISTS OF:
Traxxas Air Conditioner to DC Power Supply Adapter with 110 Power Cable and 12V
    Output Cable with Socket

SPECS:
Input 100 - 240V Air Conditioner, 50-60Hz, 1.0A
Output: 13.8V, 3.5A

COMMENTS:
For dry areas and indoor usage just. Do not expose to moisture.
Do not open case, threat of electrical shock.