Traxxas Stampede 4X4 Stub Axles Rear Heavy Duty

These are the Back Heavy Duty Stub Axles for the Slash 4x4 from Traxxas

FUNCTIONS:
Aluminum construction

SUCHES AS:
2 rear stub axles
2 pins

REQUIRES:
Setup on vehicle

JMLM 3/9/11

This item praises the main item below.

Diff Output Yokes Heavy Duty (2) Stampede 4X4

These are the Traxxas Heavy Duty Differential Output Yokes.

FEATURES:
Fits the Traxxas Stampede 4x4, Telluride 4x4, Slash 2WD

Black plastic construction

SUCHES AS:
2 Ouput Yokes
2 Screw Pins

This is a amazing addition to the item currently being discussed.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Want one more fantastic item to compliment the above discussed item?

Stub Axles Front Heavy Duty Stampede 4X4

This is the Front Heavy Duty Stub Axles for the Stampede 4x4 from Traxxas

FUNCTIONS:
Plastic and steel construction

SUCHES AS:
2 Stub axles

REQUIRES:
Setup on vehicle

This item is regularly bought with the above discussed item.

Bumper, Rear/ Bumper Mount, Re

This is the Back Bumper and Mount for the Traxxas Slash 4x4.

FUNCTIONS:
Solidified plastic construction
Black in color

SUCHES AS:
One rear bumber
One rear bumper install

REQUIRES:
Setup on chassis

Want one more fantastic item to compliment the above discussed item?

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated construction

SUCHES AS:
Eiqht 4mm flanged nylon locking nuts

SPECIFICATIONS:
Outdoors diameter: 7mm

This is a amazing addition to the item currently being discussed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

SUCHES AS:
Two Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Thickness: 0.31" (8mm)

COMMENTS:
Also readily available in Blue (RPMC0705)

Want one more fantastic item to compliment the above discussed item?

Steering Bellcranks/Servo Saver, Spring, Horn, Retainer

This is the Steering Bellcrank Set for the Traxxas Slash 4X4.

FUNCTIONS:
Composite nylon construction
Changes a worn or damaged bellcrank set
May likewise be installed on the Traxxas Rustler, Outlaw and 2WD Slash
    models (put together in different setups depending on model)

SUCHES AS:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring
One Spring Retainer
Two Servo Arms
Two Shoulder Screws
Two 3x15 Counter Sunk Device Screws
Two Hollow Balls
Four Bushings
Direction Sheet

REQUIRES:
Assembly and installation following the model handbook and consisted of
guideline sheet

This item praises the main item below.

Half Shafts Heavy Duty Stampede 4X4

This is the Heavy Duty Half Shaft Set for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel construction

SUCHES AS:
2 external splined half shafts
2 internal splined half shafts
4 metal u-joints

REQUIRES:
Setup on vehicle

This item praises the above discussed item.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum construction, coated
Anodized black with white springs
Totally put together

SUCHES AS:
Four fully put together shocks with white springs
Installing hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and putting together onto the model