Traxxas Stampede 4X4 Stub Axles Rear Heavy Duty

These are the Rear Strong Stub Axles for the Slash 4x4 from Traxxas

FUNCTIONS:
Aluminum construction

SUCHES AS:
2 rear stub axles
2 pins

NEEDS:
Setup on vehicle

JMLM 3/9/11

This item praises the main item here.

Diff Output Yokes Heavy Duty (2) Stampede 4X4

These are the Traxxas Strong Differential Output Yokes.

FEATURES:
Fits the Traxxas Stampede 4x4, Telluride 4x4, Slash 2WD

Black plastic construction

SUCHES AS:
2 Ouput Yokes
2 Screw Pins

This is a superb enhancement to the item currently being gone over.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Want an additional excellent item to match the above mentioned item?

Stub Axles Front Heavy Duty Stampede 4X4

This is the Front Strong Stub Axles for the Stampede 4x4 from Traxxas

FUNCTIONS:
Plastic and steel construction

SUCHES AS:
2 Stub axles

NEEDS:
Setup on vehicle

This item is frequently acquired with the above mentioned item.

Bumper, Rear/ Bumper Mount, Re

This is the Rear Bumper and Mount for the Traxxas Slash 4x4.

FUNCTIONS:
Solidified plastic construction
Black in color

SUCHES AS:
One back bumber
One rear bumper mount

NEEDS:
Setup on chassis

Want an additional excellent item to match the above mentioned item?

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated construction

SUCHES AS:
Eiqht 4mm flanged nylon locking nuts

SPECS:
Outdoors size: 7mm

This is a superb enhancement to the item currently being gone over.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

SUCHES AS:
Two Front/Rear A-Arms

NEEDS:
Setup at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

COMMENTS:
Likewise offered in Blue (RPMC0705)

Want an additional excellent item to match the above mentioned item?

Steering Bellcranks/Servo Saver, Spring, Horn, Retainer

This is the Steering Bellcrank Set for the Traxxas Slash 4X4.

FUNCTIONS:
Composite nylon construction
Replaces a worn or broken bellcrank set
May likewise be set up on the Traxxas Rustler, Bandit and 2WD Slash
    models (put together in different setups depending on design)

SUCHES AS:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring
One Spring Retainer
Two Servo Arms
Two Shoulder Screws
Two 3x15 Counter Sunk Maker Screws
Two Hollow Balls
Four Bushings
Direction Sheet

NEEDS:
Assembly and installation following the design handbook and consisted of
direction sheet

This item praises the main item here.

Half Shafts Heavy Duty Stampede 4X4

This is the Strong Half Shaft Set for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel construction

SUCHES AS:
2 external splined half shafts
2 internal splined half shafts
4 metal u-joints

NEEDS:
Setup on vehicle

This item praises the above gone over item.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum construction, layered
Anodized black with white springs
Completely put together

SUCHES AS:
Four fully put together shocks with white springs
Mounting hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and assembling onto the design