Traxxas Stampede 4X4 Hold Down Battery Clip

This is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL.

FEATURES:
Composite construction
Permits setup of taller multi-cell batteries

CONSISTS OF:
Battery Hold Down with metal Post and Body Clip

REQUIRES:
Attaching to chassis

COMMENTS:
For stock battery holder, order TRAC6730.

This product praises the main item right here.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/10 scale vehicle applications
Prewired with Traxxas high existing adapter

CONSISTS OF:
11.1V 5000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

REQUIRES:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Ranked Capacity: 5000mAh
Release Score: 25C constant
Dimensions: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Stabilizing Connector: ElectriFly
Watt Hours: 56Wh

COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER allow to Release below 2.5V per cell
NEVER disassemble or customize pack wiring in any method or puncture cells
NEVER place on flammable products or leave ignored throughout
    charging
ALWAYS Charge in a fireproof location
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY stay out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm